Infitary 160W H7 H4 LED Car Headlight High Power CANBUS Bulb H8 H9 H11 HB3 9005 HB4 9006 Lamp Double Copper Tube Lights for Auto

Infitary light up your way!

40000LM/pair, Good light concentration, no stray or blinding light, effectively protect driving safety.
High Power, 140W/pair, 10 times brighter than halogen lights.

High quality lamp beads
Using high quality 2 sides 15 cores LED CSP 4575, total 30 cores, High luminous efficiency.
Copper substrate quickly conducts heat to ensure service life.
Solid rivet fixing(Many other car headlight chips are fixed by screws and are easily to fall off)

Efficient heat dissipation system
Double copper tube, Aviation aluminum alloy 6063 material, better thermal conductivity, 360 degree heat radiating, All-in-one aluminum profile as good heat conduction system and longer service life.
Cooling system with powerful turbo fan with 15,000 RPM to fast cooling, high air flow for faster cooling rate,Reduce light decay,keep super long time lighting over 100000hrs.

External drive
External drive with built-in decoding and anti-interference, higher conversion efficiency, no need for wire breakage or modification.
0.1 second 100% light-up. Canbus-ready, EMC-ready,No error and flash problem for 95% vehicle.

Pnp,Easy Installation
it's suitable for more than 99% car models, Easy installation.
Plug-and-Play direct replacement in few mins. No need extra operation and no need to unlock button.It is 360 degree rotatable to adjust the beam.
For some cars, had to make little adjustment of the adapter to get proper light beam.

Note: For truck applications, additional power supply modification is required (We don't sell the power supply).

Explanation about Lamp Beads
H7, H11, H1, H3, 880, 9005/HB3, 9006/HB4, 9012, these belong to single lamps, with one lamp bead on each side of the lamp body, totaling two lamp beads. When in use, all the light beads are on.
H4/9003/HB2, 9004/HB1, 9007/HB5, 9008/H13, These belong to dual lamps, with 2 beads on each side of the lamp body, totaling 4 beads. For general car models, half of the light bulbs are on during high beam and the other half are on during low beam; Sometimes for special car models, the light bulbs can be fully illuminated when high beam.

REAL HIGH POWER

Attention

1. Make sure choose a right socket type before order. So you'd better check it on the web or just send inquiry with your car information, it's happy for us to check it for you.
2. It is suitable for most cars, not 100% error free. If it does not work after installation, please try 180° reverse the plug and reconnect. If it is flickering or has any error. it may be caused by the different current. Because our energy-efficient LED headlights require less current than halogen or xenon headlamps, then you need to install a pair of decoders to solve the problem.

Installation Precautions

1. Put the vehicle into park or make sure it is securely in gear.
2. Make sure to have the ignition turned off and the keys removed.
3. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
4. Make sure not to touch the lamp bead with your fingers, so as not to stain or even damage it. Do not press the fan to avoid damage to the fan.
5. Pay attention to the positive and negative.Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
6. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb,The wires of the lights should be facing down.
7.It is best to install a dust cover to prevent dust from affecting the headlights service life.