DAWNKNIGHT K5C PLUS 140W H7 Canbus Led Bulbs 4300K LED H4 H11 HB3 9005 HB4 9006 K6C Led Double Copper Tube Fog Light 12V 2PCS

DAWNKNIGHT K5C PLUS 140W H7 Canbus Led Bulbs 4300K LED H4 H11 HB3 9005 HB4 9006 Double Copper Tube Fog Light 12V 2PCS

Features:

The new side-by-side double copper tube design reduces the probability of failure and is more reliable and stable.

High-power LED chip, brightness increased by 450%.

High-speed ball fan for better temperature drop.

Operating Voltage : DC 12V

Operating Temperature: -40degC ~ +80degC

Color Temperature : 6000K/4300K

Starting Power : 140W±10%/Pair(H4,H1=100W±10%/Pair)

Design: All In One Design With Cooling Fan

With canbus function

SystemLifespan: >50000hrs

Design: All In One Design With Cooling Fan

Heat Dissipation Theory : Aviation aluminum 6063 

Car Suitable Models: 90% of models on the market

The K5C PLUS has a temperature adjustment function. Starting Power 130W±10% /Pair is the initial power and helps to eliminate the fault light check error on some vehicles. As the bulb temperature increases, the power drops to a certain level. This is normal and will help prolong the life of the bulb. The power provided in the data is laboratory data and does not represent the power after long-term operation.

H1.H4 due to structural reasons, the power will be lower than other models, about 100W±10%/Pair

Products include:

A pair of LED bulbs 

An English manual

Product guarantee:

100% brand new product

100% original factory production

Special reminder:

1.If you plan to buy this model (D1S/R/C, D2S/R/C, D3S/R/C, D4S/R/C), please be prepared to modify the power plug. You cannot use any HID connector (AMP, KET, KET2, etc.) to connect this LED bulb.

Before installing the LED, you need to remove the HID lamp ballast (ignition device), and the LED needs to be directly connected to the 12V power supply.

2.This high-power LED bulb needs to be installed by professionals. Some German or American brand vehicles may have an error message or flash and then go out on the dashboard after using LED, including one of the two bulbs going out. These situations are compatibility issues and require the installation of a decoder or adjustment of the on-board computer options. They are not within the scope of bulb failure.

3.If the product fails, we provide a 1-year warranty and require you to provide video materials for review. The video must show the unique code on the bulb driver housing.

4.This product is not suitable for use in fog lamps, sediment will reduce the life of the cooling system, if you need to use it on fog lamps, please contact the staff, we will recommend more suitable bulbs for you