TOPDON AB101 Digital Battery Tester 12V Portable Car Battery Monitor Car Cranking Charging Circut Tester Auto Analyzer Vehicle

TOPDON AB101 Car Battery Tester 12V Voltage Battery Test Automotive Charger Analyzer 2000CCA Car Cranking Charging Circut Tester

Highlights of car battery tester-AB101

①Battery health test ➤ It conducts a benchmark test on the battery and gives suggestions on whether to replace the battery. In addition, it also includes start-up and charging system testing.

②Wide range of testing ➤ AB101 battery tester is specially designed for most 12V batteries, such as ordinary flooded batteries, AGM flat batteries, AGM spiral batteries and gel batteries, and strictly follows the battery rating standards-CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.

③Start test and charging test ➤It will display the test result within 5 seconds. The 12V charging system is fully inspected to ensure that the generator output is normal, the rectifier diode is working normally, and the charging current is controlled.

④Unparalleled user experience ➤ Lighter, durable, and menu-based operation, even beginners can easily use this car battery tester.

⑤ Switch between 6 languages at will ➤ English, Russian, Spanish, French, German, Italian.

⑥Safety protection ➤ The metal alligator clip of the battery tester is covered with a rubber protective cover to ensure safety. 1 year warranty.

TOPDON AB101, Car Battery Health Guard!

➤CCA: 100~2000 CCA

➤Battery Test: The car battery analyzer shows 5 different results: “Good Battery”, “Good-Recharge”, “Replace”, “Bad Cell- Replace”, “Charge-Retest”.

➤Charging Test: The battery tester checks ripple status, load voltage, and charging system status.

➤Cranking Test: The battery is regarded as OK if cranking voltage is higher than 9.6V or abnormal if lower than 9.6V.

➤Ripple Test: The load tester tests the charging current ripple to find out whether the diode is normal or not.

➤In-Vehicle or Out-Of-Vehicle: No matter whether the battery is connected with vehicle or not, the battery tester can test it directly.

➤No Need to Charge or Update: The auto battery tester will automatically start up after the clamps are correctly connected. Without the needs of any software updates.

Run multi-test in one button

Auto Battery Test + Cranking Test + Charging Test + State of Health +State of Charge + Ripple Analysis

Start test data overall status

Cranking test to know the whole state of the starting system according to the data.

TOPDON PK KONNWEI，AUTOOL，ANCEL

Cranking & charging test

5 test results, no need prior knowledge

Multiple languages

For English, Spanish, French, German, Russian, Italian.

Easy to carry

small and exquisite

Attention on AB101

➤If the clamps are stably clutched?--Confirm the clamps connection

➤If the battery terminal conduct normally?--Check if the terminals rusts

➤If the battery has low battery?--Charge your vehicle battery

➤If temperature is too low?--The result will be inaccurate when the temperature is below 14°F (-10°C)

➤If there is strong magnetic force? --Remove the stuff of strong magnetic force

Incompatible Problems

➤If the voltage range is beyond the product? --Check the volatge range of your battery and the products

LCD Display

➤Low voltage of your battery--Charge your vehicle battery