12V Portable Gear Oil Extractor Pump PE and PVC Freestanding Engine Oil Transfer Pump

Notes ：
1.Please check the style and size before purchasing.
2.Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included.
3.It is forbidden to abandon the pump at startup to prevent engine oil spillage.
4.Please do not use this pump to pump water, gasoline, gear oil or highly flammable liquids.
5.Please note that this product has passed the pump oil test during the factory test, so it is normal to have residual oil in the pump.
6.Please note that the hose needs to be replaced in a timely manner as it hardens after prolonged use.
7.Please note that this product should not be operated for more than 30 minutes.
8.Please check that the inlet pipe and the joint are tightly connected to prevent leakage and affect suction.
9.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.

Specification：
Style: Modern
Shape: Cylindrical
Material: Cast Iron, Aluminum Alloy, PE and PVC
Process: Spray Paint, Copper Plated
Voltage: 12V
Mount Type: Freestanding
Assembly Required: Yes
Flow Rate: 1-4 L/0.22-0.88 gal/min
Power: 100W
No-loading Current: 2.5A
Loading Current: 5A
Working Cycle: 30min
Number of Hoses: 3
Hose Diameter: 6mm/0.24in, 8mm/0.31in,10mm/0.39in
Each Hose Length: 1m/3.28ft
Spring Length: 1.8m/5.91ft
Overall Pump Head Length: 9cm/3.54in
Product Size: 16*6*7cm/6.3*2.36*2.75inch
Package Size: 21*18*14cm/8.27*7.09*5.51in
Gross Weight: 1.7kg/3.75lbs

Details ：
Clear Hoses: 3 clear hoses are convenient for you to visualize the oil flow status.
Long Spring Cord: A 5.91-ft long spring cord supports a more flexible use environment.
Thoughtful Accessories: This product includes 2 copper-plated clamps, 2 stainless steel connectors, 2 quick connectors, and a clamp to provide you with more convenient use.

Application：
It can be used to replace oil and diesel in cars, motorcycles, scooters, quads, trucks, boats, forklifts, caravans, generators, tractors, driving lawnmowers, snowplows, agricultural machinery and other 12 V vehicles.

Key Features：
Made to Last: Adopting high-strength cast iron casing, aluminum alloy pump head, as well as PE and PVC hoses, which ensures excellent abrasion resistance and corrosion resistance, and is still not easy to deform after a long time of use.
High Efficiency: It adopts a 100W high-performance pure copper motor with a flow rate of up to 0.22-0.88 gal per minute, which can pump oil quickly without waiting.
Wide Compatibility: It is suitable for all kinds of 12V power supply, which greatly increases the applicability.
Precise Control: With a built-in regulator valve, it can easily control the amount of oil output to meet different needs. Moreover, the silver contact switch gives you more intuitive control over circuit on-off.
Easy to Carry: The compact size of 2.36*6.3 inches and lightweight (gross weight: 3.75 lbs.) make it easy for you to carry and move around, meeting more usage scenarios for you.
Practical Tool: Owning this product, you can easily connect the two battery terminals directly to the battery source for oil transfer, without another special tool.
Package Included：
1* DC Engine Oil Transfer Pump
2* Stainless Steel Connectors
2* Quick Connectors
3* Hoses
1* Clamp
1* English Manual

Please feel free to contact us if you have any questions about this product.
If you receive a damaged or defective item, please reach out to us and we will reply to you within 24 hours.
Welcome to write a review! We are glad to listen to your feedback!