Car Tire Pressure Monitor Sensor System Relearn Tool 315MHz or 433MHz Universal U508 Auto TPMS Reset Tool for Ford Jeep Opel Jeep etc Car Diagnostic Tools

U508 Tire Pressure Diagnosis Reset Learning Tool

Suitable for most vehicles equipped with TPMS system, please check the exact model list to verify if your vehicle is compatible with U508 tpms tool.

Application:

U508 is an essential tool equipped with a 315MHz or 433MHz tire pressure monitoring system for replacing tire pressure sensors, tire pressure alarms, disassembling or replacing tires.

When do I need the U508 tire pressure learning tool?

✅️Installing a new TPMS sensor, deflating, or adding air to the tires does not enable the system to recognize the new sensor.

✅️When the tire pressure indicator light is on, after maintenance, it is necessary to reset the tire pressure to turn off the TPMS light.

✅️Replacing winter or summer tires requires resetting the TPMS.

✅️After resolving issues such as low or leaking tire pressure, replacement or installation of tire pressure monitoring equipment, tire replacement, and sensor damage, it is necessary to reset the TPMS.

How to use U508 tire pressure monitoring system reset tool?

1. Need 1PC 9V battery to work.(Not included)

2. Set the car in TPMS learning mode.(car horns twice)

3. Starting from the left front tire, the antenna of the dedicated device for tire pressure monitoring is facing upwards against the tire sidewall near the rim of the valve stem to start the antenna. Press and release the button and wait for the speaker to emit a chirp. Once the speaker is chirping, the sensor information is read and the turn signal to be read at the next position will light.

4. Follow this order to rest TPMS one by one: Front left, front right, rear right, rear left.

5. After all sensors reseted, the car horns twice, the TPMS re-learn finished.