






Power Amplifier Module Pure Post Stage Amplifier Board 2x100W Or 200W Subwoofer Power Amplifier Module Support for TPA3221 Chip
47.98$
23.99$
Quantity:
1
Availability:
Limited StockColor
Delivery estimate
Delivery:
Nov 26 – Dec 2 to United States
1.99$ shippingTrackedImport duties may applyPure Post Stage Amplifier Board 2x100W Or 200W Subwoofer Power Amplifier Module Support for TPA3221 Chip:
Feature:
1. Applicable Speaker: In dual channel mode, it is suitable for 3-8Ω, 20-100W speaker; in PBTL single channel mode, it is suitable for 2-8Ω, 50-200W speakers, to ensure dependable running
2. Product Features: It boasts high current, low magnet loss, small parasitic capacitance, and less heat generation. It uses OFC wire to enhance sound quality, and has strong anti electromagnetic interference performance
3. Heat Sink: The rear stage amplifier board incorporates a thickened heat sink for quiet and long lasting heat dissipation. It delivers clear sound with fast low frequency response, strong mid frequency texture, high smoothness in high frequencies, and minimal tangent loss
4. Multiple Guards: This rear stage amplifier board offers multiple protective mechanisms, including reverse polarity guard, under voltage guard, overheating guard, over current guard, and short circuit guard to ensure security during use
5. Compact and Practical: This power amplifier board features a compact size and reasonable structure, equipped with a 3P double ended shielded cable to ensure stable connections, making it suitable for various audible system
Specification:
Item Type: Pure Post Amplifier Board
Product Material: PCB
Power Amplifier Chip: Support for TPA3221
Applicable Speaker: Double Channel Mode: 3-8Ω, 20-100W; PBTL Single Channel Mode: 2-8Ω, 50-200W
Heat Dissipation: Multi Fin Heat Sink
Gain Selection: Toggle Switch 2, 28dB/38dB 2 Gears
Bridge Configuration: Power off first. Set toggle switch 1 to ON position, R+L+ short circuit parallel output, R-L- short circuit parallel output
Maximum Power: Mode: 2x70W at 24V 4Ω, 2x100W at 30V 4Ω; PBTL Mode: 150W at 30V 3Ω, 200W at 30V 2Ω, 110W at 30V 4Ω
Guards: Under Voltage, Overheat, Over Current, Short Circuit, Reverse Polarity Guard
Product Size: Approx. 100 x 65 x 18mm / 3.9 x 2.6 x 0.7in
How to Use:
Direct Installation and Use
Package List:
1 x Amplifier Board
1 x 3Pin Dual End Shielded Cable
1 x User Manual
Note:
The higher the voltage, the higher the output power. Do not connect to an alternating current power supply, or it will be burned out.
:









:
Specifications
- Origin
- Mainland China
- Compatible Audio & Video Equipment Style
- Earphones & Headphones
- Choice
- yes
Customer Reviews
17 ratings
timely delivery (2)
well-packaged (1)
insufficient connection documentation (1)
Customer photos (1)
Buyer from Brazil
October 31, 2026
Variant: Color:black
Very good, I recommend it to everyone, a great product.
Buyer from South Korea
October 15, 2026
Variant: Color:black
It's a good product, but I think it would have been even better if there was more detailed information on the R.L connection and woofer connection.
Buyer from Mexico
September 22, 2026
Variant: Color:black
It is not from the WhatsApps mentioned.
f***e
September 6, 2026
Variant: Color:black
Quality amplifier used in doiS woffer 6.5 Well packaged with instructions and fast shipping Recommended seller
Buyer from Kenya
July 28, 2026
Variant: Color:black
Arrived on time as advertised
Buyer from Bangladesh
June 29, 2026
Variant: Color:black
Bangladeshi as his good man
Power Amplifier Module Pure Post Stage Amplifier Board 2x100W Or 200W Subwoofer Power Amplifier Module Support for TPA3221 Chip
47.98$
23.99$
Quantity:
1
Availability:
Limited StockColor
Delivery estimate
Delivery:
Nov 26 – Dec 2 to United States
1.99$ shippingTrackedImport duties may apply






