








Starter Motor 12V 1.4KW 12T For Buick LaCrosse Allure Rendezvous Cadillac CTS ATS SRX STS Chevrolet Camaro Suzuki Grand Vitara
230.98$
101.63$
Quantity:
1
Availability:
Out of StockColor
Delivery estimate
Delivery:
✅Standard Starter Specs
vo: Voltage:12 volt
po: Power KWt:1.4 kw
te: Number of teeth:12 pcs
ro: Rotation :CR
a: Size A:68 mm
b: Drive distance:30 mm
od: Drive diameter ( outer ):31.5 mm
o1: Number of mounting holes:3 pcs
o2: Number of threaded mounting holes:0 pcs
le: Lenght:182 mm
✅Replaces OEM Part Numbers:
12598756, 12598757, 12601721, 12608653, 12610857, 12627135, 12638920, 12644788, 12645298, 12645299
STM4571BA, STM5874AB, STM5874BA, STM5874US, STM5874ZD, STM5876BA, STM6571AB, STM6571BA, STM6571LC, STM6571RN, STM6571US, STM6571ZD, STM6571ZL, STM7571BA, STM7571RD, STM7571US, STM7571ZD
M000T23871, M000T23971, M000T35871, M000T35872, M000T35874, M000T35874ZC, M000T35875, M000T35875ZC, M000T35876ZC, M000T35972, M000T36571, M000T36571ZC, M0T23871, M0T23971, M0T35871, M0T35872, M0T35874, M0T35874ZC, M0T35875, M0T35875ZC, M0T35876ZC, M0T35972, M0T36571, M0T36571ZC
WPS:17986N, 17996N, 17997N, 17999N, 17999R, 19136N, 22695MI
✅ 100% Pure Copper Internal Coil & Solenoid Assembly
✅ Heavy Duty Cast Metal Housing, Anti-rust & Fast Heat Dissipation
✅ Smooth Low Noise Cranking, Overcurrent & Overheat Protection
✅ Strict Factory Aging Test, Direct Bolt-On OEM Replacement, No Modification Required
Hassle-Free After-Sales Warranty
✅12-Month Full Warranty Against All Factory Defects
Free Replacement Or Full Refund For Quality Issues
✅90 Days Free Return If Mismatch Or Damaged In Transit

Compatible Vehicles
✅BUICK
BUICK LACROSSE 3.6L|2006–2016
BUICK RENDEZVOUS 3.6L|2006–
BUICK ALLURE 3.6L|2006–2008
✅CADILLAC (Horizontal Front Drive Vehicle)
Cadillac SRX 3.0L V6 (2010–2011)
Cadillac SRX 3.6L V6 (2012–2016)
Cadillac STS 3.6L V6 (2006–2007)
Cadillac XTS 3.6L V6 (2013–2019)
Cadillac CTS V6 3.6L 182cid|2012
Cadillac CTS V6 3.6L|2012-2017
Cadillac ATS V6 3.6L|2013-2017
✅CHEVROLET (Horizontal Platform)
Chevrolet Equinox Explorer 3.0L (2010-2012)/3.6L (2008-09/2013-17)
Chevrolet Impala Impala 3.6L V6 (2012-2020)
Chevrolet Impala Limited 3.6L V6 (2014–2016)
Chevrolet Malibu Malibu 3.6L V6 (2008-2012)
Chevrolet Traverse Crosses 3.6L V6 (2009-2017)
Chevrolet Captiva Sport 3.0L V6 (2012)
Chevrolet Colorado 3.6L V6 (2015–2016)
Chevrolet Camaro V6 3.6L 217cid|2012-2015
✅GMC
GMC Acadia 3.6L V6 (2007–2016)、Acadia Limited (2017)
GMC Canyon 3.6L V6 (2015–2016)
GMC Terrain 3.0L(2010–2012) / 3.6L(2013–2017)
✅PONTIAC
Pontiac G6 3.6L V6 (2007–2009)
Pontiac Torrent 3.6L V6 (2008–2009)
✅SATURN
Saturn Aura 3.6L V6 (2007–2009)
Saturn Outlook 3.6L V6 (2007–2010)
Saturn Vue 3.6L V6 (2008–2010)
✅SUZUKI
Suzuki GRAND VITARA XL-7 JC636 XL-7 3.6L V6 (2007–2009)

Car Starter Motor User Manual
Applicable: Conventional Automotive Solenoid Engagement Starter Motor
(Passenger Cars / Light Commercial Vehicles)
Core Content: Operation + Wiring + Maintenance + Quick Troubleshooting, Simple & Practical
Main Structure
DC Motor + Solenoid Switch (B/30 Main Positive, S/50 Control Positive, M/C Motor Terminal)
One-Way Clutch + Shift Fork
The motor housing serves as the negative ground terminal naturally.

Operating Instructions (Important for Damage Prevention)
Before starting: Manual transmission to Neutral Gear; Automatic transmission to Parking (P) Gear, pull up the handbrake.
Starting Operation: Turn the ignition key to START position, release immediately after engine ignition (the switch will reset automatically).
Operation Prohibition:
Single starting duration ≤ 3-5 seconds;
If failed, wait 10-15 seconds before retrying;
Stop operation for inspection after 3 consecutive failures.
Do not turn the ignition to START again after the engine is running.
Low-temperature Starting: Stay at ON position for several seconds for system self-check first, then start the engine to reduce battery consumption.

Standard Wiring Instructions (Universal Type)
With Starter Relay (Recommended)
Battery Positive → Relay Power Terminal → Starter B/30 (Thick Cable, Fasten Tightly)
Ignition Switch Start Gear → Relay Control Terminal
Relay Output Terminal → Starter S/50 (Thin Control Cable)
Battery Negative → Vehicle Body / Engine Ground (Form complete circuit with starter ground)
M/C terminal is internal wiring, no external connection required.
Direct Control Without Relay (Old / Compact Vehicles)
Battery Positive connect to B/30; Ignition Start Gear connect to S/50 for direct control.
Do not hold the start gear for a long time.
General Wiring Requirements
No loose terminals or oxidation; no rust or oil stains on ground connection points, keep good conductive contact.

Routine Maintenance (Every 3 Months / 5,000 KM)
Fastening Check: No cracks on housing; mounting bolts fully tightened, no loose abnormal noise.
Circuit Check: No burn or oxidation on terminals; wire insulation no aging. Polish oxidized terminals with sandpaper and apply a small amount of conductive grease.
Ground Check: Clean rust on connection points between starter, engine and vehicle body to ensure stable conduction.
Mechanical Check: Shift fork moves smoothly without jamming; one-way clutch rotates forward freely and locks reversely.
Special Reminder: If the starter gets waterlogged after wading, dry it completely before starting to avoid coil short circuit.

Common Faults & Quick Troubleshooting
1.No response when turning start gear
Probable Cause: Battery low power, poor ground connection, loose wiring, or solenoid switch failure
Simple Solution: Test the battery voltage (must be ≥12V), fasten all loose terminals, and clean rust on the ground connection points
2.Clicking sound but no rotation / slow rotation
Probable Cause: Battery low power, poor solenoid attraction, or worn carbon brushes
Simple Solution: Use jump start for auxiliary power, polish oxidized terminals, and replace worn carbon brushes
3.Starter rotates but engine cannot start
Probable Cause: Poor gear meshing, damaged flywheel gear teeth, or slipping one-way clutch
Simple Solution: Inspect the gear for damage, and replace the clutch assembly if slipping occurs
4.Starter cannot disengage after engine start
Probable Cause: Shift fork jamming, or solenoid/ignition switch fails to reset
Simple Solution: Turn off the engine immediately, inspect the switch status, and clean foreign matters on the shift fork

Safety Warnings
1.Always disconnect the battery negative terminal before wiring or maintenance to prevent short circuit, fire or electric shock.
2.The starter works with extremely high current. Do not touch wiring terminals or moving parts to avoid burn injury.
3.Replace with original compatible model only. Non-professionals are prohibited from disassembling internal precision parts.
4.Stop use and cut off power immediately if burning smell, smoke or terminal ablation occurs.

Specifications
- Origin
- Mainland China
- Item Width
- 12.5 cm
- Country/Region of Manufacture
- CHINA
- Item Height
- 13.0 cm
- Interchange Part Number
- STM4571BA, STM5874AB, STM5874BA, STM5874US, STM5874ZD, STM5876BA, STM6
- Item Weight
- 3.2kg
- Manufacturer Part Number
- 12598756, 12598757, 12601721, 12608653, 12610857, 12627135, 12638920,
- OEM NO.
- 12598756, 12598757, 12601721, 12608653, 12610857, 12627135, 12638920, 12644788, 12645298, 12645299
Customer Reviews
No reviews yet
Starter Motor 12V 1.4KW 12T For Buick LaCrosse Allure Rendezvous Cadillac CTS ATS SRX STS Chevrolet Camaro Suzuki Grand Vitara
230.98$
101.63$
Quantity:
1
Availability:
Out of StockColor
Delivery estimate
Delivery:







