






New Precision PWM Current Voltage Signal Generator 0-20mA 4-20mA 0-10V Source Simulator 0-50V 50mA Measuring Meter Calibrator
174.72$
83.87$
Quantity:
1
Availability:
Limited StockColor
Delivery estimate
Delivery:
Nov 26 – Dec 2 to United States
1.99$ shippingTrackedImport duties may apply









Product Features:
1. Triple power supply options: 24V terminal/USB-C/built-in lithium battery, flexibly adapting to diverse operational scenarios
2. High-frequency PWM output: 1-150kHz frequency + 0-100% duty cycle, meeting motor speed regulation requirements
3. Professional-grade human-machine interface: 2-inch TFT colour display with switchable Chinese/English interface for clear information presentation
4. Precise and Convenient Adjustment: EC11 digital encoder large knob with electroplated keycaps for excellent tactile feedback
5. Deeply Adapted for Industrial Environments: Specialised for industrial control signal debugging and PWM motor speed regulation across multiple scenarios
Product Specifications:
Product Name: Colour Screen Multifunctional Signal Generator
3 Power Supply Methods: External DC 24V terminal / USB-C / (Battery-equipped model) Built-in lithium battery
Battery Type: Built-in 3.7V 1500mAh lithium battery
Interface: Type-C port
Display: 2-inch TFT colour screen (320×240 pixels)
Display Interface: Switchable Chinese/English interface
Knob: EC11 digital encoder knob (20-step per revolution, with push button)
Terminal Plug Specification: 15EDGK3.81 (9-pin)
Operating Environment: 0-40°C, relative humidity <80%
Applications: Industrial control DC analogue signal debugging, electrical equipment installation and maintenance, PWM motor speed regulation, etc.
Voltage Output Range: ±12V (maximum 20mA under load, with short-circuit protection)
Voltage Measurement Range: ±50V
Current Output Range: 0-24mA (maximum sampling resistance 500Ω, short-circuit capable)
Current measurement range: ±50mA
Output adjustment range: Freely configurable, e.g. 0-20mA/4-20mA/0-10V/0-5V. Engineering display values user-configurable
PWM square wave output: Frequency adjustable 1-150kHz, duty cycle adjustable 0-100% (high level fixed at 5V, drive current <20mA, short-circuit protected)
(Note: This PWM output is unsuitable for 12V or 24V systems, as 5V constitutes a low level for both):
Power Supply Specifications: Three power supply methods: via mobile phone charger/power bank or
external 24V connection for both charging and operation:
1. External terminal supply: DC 24V ±4V, power 2W (non-charging)/5W (charging)
2. External USB-C 5V, current 0.4A (non-charging)/1A (charging)
3. (Battery-equipped model) Built-in 3.7V lithium battery, maximum charging current 0.8A. Battery indicator turns green and charging stops automatically upon full charge. Typically takes over 6 hours to charge fully. Fully charged battery provides 1-5 hours of operation depending on output load.
Charging Status Indication:
1. When powered off, connecting a Type-C charger to the charging port displays a red charging indicator below; turns green upon full charge.
2. When powered on, connecting a Type-C charger to the charging port displays a red charging indicator below. The battery icon in the top-right corner of the screen shows green and cycles through increasing battery bars (regardless of pre-charge remaining capacity; always starts green). Upon full charge, the charging indicator below turns green, and the battery icon in the top-right corner of the screen remains solid green. When the Type-C charging cable is disconnected, the battery icon in the top-right corner of the screen displays white.
Precautions:
1. Switch off the power before connecting cables;
2. Operating beyond the specified technical parameters may cause malfunction or damage to this instrument.
Frequently Asked Questions:
Q: How does one set the duty cycle for PWM, switching between frequency adjustment (Hz) and duty cycle (%),?
A: Press the key to enter PWM adjustment mode. Press the knob once to toggle between PWM adjustment states (frequency 1-150000Hz / duty cycle 0-100%). Corresponding unit characters will display beneath the PWM indicator.
Q: How does one access the help/settings menu?
A: Press and hold the lower button for 2 seconds to enter the menu. Press the lower button once to toggle between Help/Settings. Press the knob again to enter the corresponding interface.
Q: What gauge is the supplied cable?
A: 20AWG (0.5mm²)
Packing List:
Generator main unit x1
Flathead screwdriver x1
USB charging cable x1
Alligator clip test leads x4
Specifications
- Origin
- Mainland China
- Semi-finishedproduct
- Yes
- DIY Supplies
- Electrical
- Battery Included
- Yes
- Certification
- CE, RoHS
- Display Size
- 3.0 - 4.9 Inches
- Model Number
- BRT SG08
- Voltage measurement range
- ±50V
Customer Reviews
3 ratings
Customer photos (2)
Buyer from South Korea
November 11, 2026
Variant: Color:With Battery Inside
I like it.
Buyer from Thailand
October 4, 2026
Variant: Color:With Battery Inside
New Precision PWM Current Voltage Signal Generator 0-20mA 4-20mA 0-10V Source Simulator 0-50V 50mA Measuring Meter Calibrator
174.72$
83.87$
Quantity:
1
Availability:
Limited StockColor
Delivery estimate
Delivery:
Nov 26 – Dec 2 to United States
1.99$ shippingTrackedImport duties may apply






