







BAYCK ELRS 915MHz Nano Long Range Receiver ExpressLRS 100mW Telemetry RX with T Antenna WiFi Update for FPV Drone BETAFPV 900 RX
45.04$
22.07$
Quantity:
1
Availability:
10+In StockColor
Delivery estimate
Delivery:
Nov 27 – Dec 3 to United States
1.99$ shippingTrackedImport duties may apply




Product Description:
ExpressLRS
ExpressLRS aims to provide the best completely open, high refresh radio control link while maintaining a maximum achievable range at that rate with low latency. Vast support of hardware in both 900 Mhz and 2.4 GHz frequencies.
SPECIFICATIONS 1
●Brand:BAYCK
●Model:ELRS 2.4G NANO
●RF Freq:2.4Ghz
●IC:SX1281+ESP8285
●TX Power:100mW
●Color:Black
●Connector:IPEX 1
●Input Power:3.6-5.5V
●Weight:0.4g(receiver only)
●Size:11mm*18mm
●Firmware: BETAFPV Nano 2400 RX 2.2.0
SPECIFICATIONS 2
●Brand:BAYCK
●Model:ELRS 915M NANO
●RF Freq:915Mhz
●IC:SX1276+ESP8285
●Color:Black
●Connector:IPEX 1
●Input Power:3.6-5.5V
●Weight:0.6g(receiver only)
●Size:11mm*18mm
●Firmware: BETAFPV 900 RX 2.2.0
Receiver indicator light:
Double flashing (code matching mode)/slow flashing (no transmission signal received)
Always on (receiving transmission signal)/Flash fast (WIFI upgrade mode)
The receiver quickly and continuously switches on and off three times to enter the code matching mode, with a time of only 20 seconds,
Afterwards, enter WiFi upgrade mode. Please use the 20 second double flash in the middle for frequency matching.





























Common Q&A
1、 Q: Can this receiver match the frequency of the xxx brand high-frequency head?
Answer: The ELRS project is an open-source project, so as long as a high-frequency converter uses the ELRS protocol, regardless of brand, it can be frequency matched with each other, but three conditions must be met;
1. The frequency should be the same, both 2.4G or 915MHz;
2. The firmware version should be consistent, for example, if the high-frequency head is flashing the firmware of 2.5.0, then the receiver should also flash the firmware of 2.5.0;
3. None of them have frequency matching passwords, or they all have the same password set.
2、 Q: How to enter the frequency matching mode?
Answer: After welding the receiver, quickly power on the aircraft three times, that is, immediately unplug when powered on - immediately unplug when powered on - do not unplug when powered on; After an interval of 1.5 seconds, if the operation is correct, the receiver's Ding will cycle and flash twice, indicating that it is in frequency synchronization. At this point, press the bind button on the remote control script again to successfully align the frequency. The receiver light will turn on continuously.
3、 Q: My receiver couldn't enter frequency synchronization mode for the first time, and the light kept on. Why?
Answer: After multiple after-sales visits, we have encountered similar problems and found that some of the TXRX ports on the flight control are abnormal, causing the receiver to enter boot flashing mode when powered on. At this time, only a new TX RX needs to be replaced on the flight control to solve the problem.
4、 Q: Why does my receiver light keep flashing fast?
Answer: If you do not enter the frequency synchronization state after power on, or if the remote control receiver has not been turned on and there is no signal for 60 seconds, it will automatically enter the WIFI flashing mode and the indicator light will flash quickly.
5、 Q: How to enter WiFi flashing mode to flash firmware for the receiver?
Answer: The answer is the same as before. When powered on, it will enter WIFI flashing mode in about 60 seconds, and the light will flash quickly.
The Shell Model BAYCK series receiver RX2.4G receiver is an open-source architecture based on ExpressLRS and multiple channels. The receiver uses a low latency and high refresh rate RF chip, with a high refresh rate of 25Hz-500Hz, making it very suitable for - PV competitions and remote FPVs. At the same time, these receivers have ultra light and ultra small dimensions, making installation more convenient and the aircraft simpler.
Indicator light status:
Double flashing: Code matching mode
Slow flashing: No transmission signal received
Always on: Received transmission signal
Specifications
- Origin
- Mainland China
- Material
- Composite Material
- Remote Control Peripherals/Devices
- RECEIVERS
- Model Number
- ELRS
- Use
- Vehicles & Remote Control Toys
- Tool Supplies
- Assembled class
- Size
- 11*18mm
- Four-wheel Drive Attributes
- Assemblage
Customer Reviews
1 rating
BAYCK ELRS 915MHz Nano Long Range Receiver ExpressLRS 100mW Telemetry RX with T Antenna WiFi Update for FPV Drone BETAFPV 900 RX
45.04$
22.07$
Quantity:
1
Availability:
10+In StockColor
Delivery estimate
Delivery:
Nov 27 – Dec 3 to United States
1.99$ shippingTrackedImport duties may apply






