





Oil Filter Screw Air Compressor Oil Filter 66094172EF
66.76$
30.71$
Quantity:
1
Availability:
Out of StockSet Type
Delivery estimate
Delivery:
Synchronized maintenance suggestion
It is recommended to replace the oil filter with every oil change, and perform comprehensive maintenance including air filter and oil separator cartridge to ensure overall cleanliness of the air compressor system and extend main unit service life.
Statistics show that skipping comprehensive maintenance every 4000 hours results in at least 3% additional energy consumption.
Installation notes
Replacement must be performed after shutdown and pressure relief. When installing a new filter, apply a small amount of lubricating oil on the gasket and tighten by hand only. Do not over‑tighten with tools. Check for oil leakage after startup.
Shorten interval for harsh conditions
For equipment operating long‑term in high‑temperature, high‑dust environments (mines, ceramic factories, chemical plants, etc.), shorten the replacement interval to approximately 2000 hours and verify filter quality.
Standard replacement interval
Under standard working conditions, the recommended replacement interval is 3000–4000 hours. For new machines, replace the oil and filter after the first 500 operating hours, then perform regular replacement every 2000–3000 hours.
Purchasing Recommendations
Reliable quality control
Genuine Kaishan spare parts undergo strict quality inspection to ensure each filter meets original technical standards, with good concentricity, high pressure resistance, straightness and burr‑free surfaces.
Wide application
Suitable for general industrial scenarios, meeting air compressor maintenance needs in machinery processing, chemical, textile, pharmaceutical, metallurgy and other industries.
Easy installation
Hand‑spin design enables quick replacement without special tools, greatly convenient for on‑site maintenance personnel.
Multiple OE replacement numbers
Compatible with alternative part numbers in the same series including 66094212EF, 66135177EF, 66135177, facilitating procurement and inventory management.
Precise dimensional matching
Product size: Φ94×172mm, rubber groove Φ71×Φ62, fully consistent with original specifications, eliminating risks of oil leakage or installation failure due to mismatched dimensions.
Standard thread specification
Thread: 1‑12 UNF, widely compatible and allowing quick installation and replacement.
4. Compatibility & Installation: Standard Thread, Wide Adaptation
High temperature resistance
The filter maintains stable filtration performance under high temperatures generated by long‑term continuous operation of screw air compressors, adapting to various working conditions.
Bypass valve (safety valve)
The low‑pressure series filter is equipped with a bypass valve. When the filter is clogged due to overdue service or lubricating oil viscosity is excessively high, the bypass valve opens automatically to maintain continuous oil circulation and prevent seizure or locking of the main unit due to oil starvation.
3. Key Functional Design: Bypass Protection, Safe and Reliable
Maximum working pressure differential 1.6MPa
The product can withstand a pressure differential of up to 1.6MPa, maintaining stable structural strength even as the filter gradually clogs, ensuring safe system operation.
Low pressure drop design
Low initial pressure drop and long cleaning interval. The filter media provides good permeability and low flow resistance, ensuring smooth lubricating oil circulation, preventing insufficient lubrication or overheating due to clogging, and reducing energy consumption.
10µm high‑precision filtration
With a filtration precision of 10 micrometers (µm), it effectively removes metal wear debris, colloidal impurities and other mechanical contaminants in lubricating oil, ensuring safe and efficient operation of the screw main unit bearings and rotors.
2. Filtration Performance: Efficient Interception, Protects the Main Unit
Stainless steel support core
The core is made of stainless steel with high strength and anti‑collapse performance, ensuring structural integrity under high pressure differential and avoiding filtration failure caused by filter deformation.
Pleated fiberglass filter media
The filter layer uses fiberglass in a pleated structure. Compared with ordinary filter paper, it features better air permeability, low resistance and large dirt‑holding capacity, effectively capturing fine particles in lubricating oil.
High‑strength metal housing
The housing is made of stainless steel and cast steel, offering excellent corrosion and pressure resistance to withstand the high‑temperature and high‑pressure environment during long‑term operation of screw air compressors. Product dimensions: 105×105×185mm, net weight 0.9kg.
1. Material & Craftsmanship: Sturdy and Durable for Screw Compressor Conditions
Detailed Selling Points
66094172EF is an original genuine oil filter for screw air compressors. It adopts pleated fiberglass filter media and a stainless steel support structure, equipped with a bypass valve safety protection mechanism. With a filtration precision of 10µm, it has a service life of up to 3000–4000 hours.
Featuring a standard 1‑12 UNF thread for wide compatibility, it fully covers Kaishan BK series screw air compressors in the 7.5–22kW power range. It is a key maintenance component that keeps the screw main unit lubrication system clean and reduces failure rates.
Core Selling Points Summary
Specifications
- Origin
- Mainland China
- is_customized
- Yes
- Weight
- 808g
- Model Number
- 66094172EF
- Choice
- yes
Customer Reviews
No reviews yet
Oil Filter Screw Air Compressor Oil Filter 66094172EF
66.76$
30.71$
Quantity:
1
Availability:
Out of StockSet Type
Delivery estimate
Delivery:







