XINYI Sini Audio C50L/C100L Stereo Bluetooth Digital Power Amplifier Board 50W Dual Channel 360 Degree Stepless Tuning AMPModule

XINYI Sini Audio C50L/C100L Stereo Bluetooth Digital Power Amplifier Board 50W Dual Channel 360 Degree Stepless Tuning AMP Module

Note: The link includes two specifications of C50L/ C100L Power amplifier board, please check before placing an order.

Model: C50L (50W*2, Bluetooth 5.0, support bluetooth 5.0,AUX, U disk input)

Parameters:

--Bluetooth version: 5.0 (without sunscreen, 15 meters)

--Output channel: 2.0 channel

--Chip model: AP3050D

--Working mode: Class D

--Audio input: support bluetooth 5.0,AUX, U disk Play

--Rated output power: 50W+50W

--Frequency response: 20Hz to 20KHz

--Working voltage: DC8V to DC26V

--Recommended power voltage: DC19V

--Fit speaker parameters: 4-8 ohms

--size: 56*50*18mm

--Net weight: about 61g

Note:

For DIY---The outer casing is a material package, It needs to be assembled by itself, and the material package is given a screwdriver.

Model:C100L (50W*2, Bluetooth 5.0, support bluetooth 5.0,AUX, U disk input)

Feature:

1. Independent adjustment of high and bass of left and right channels, independent adjustment of heavy bass, 360 degree stepless tuning.

2. Mobile APP control. APP visual operation playback mode, support for Apple Android (please download in for Google Market, search 'Sinilink' download).

3. The main knob adopts the rotary encoder only used in high-end power amplifier, realizing the smooth feel of 360 degree stepless tuning with one key to start and stop, and long press the switch is simple and convenient to operate.

4. Using domestic class -D power amplifier chip scheme, high efficiency, good distortion and anti - squeaking sound, sound quality transparent, strong driving force .

5. The use of special thermal silica gel paste large area heat sink, close to the shell of copper heat dissipation, heat dissipation area doubled, to ensure full power and high performance operation of the product.

6. Supported audio input: Bluetooth-compatible 5.0, AUX, sound card input, USB flash drive playback (USB flash drive file system must be FAT32, the maximum support 32GB)

Specification:

Number of channels: left and right double channels (stereo)

Applicable horn: 4-8 Ohms, 30-300W

Power supply voltage: DC 5~26V(the higher the voltage, the greater the output power)

Chip model: AP3050D

Working mode: Class D

Bluetooth-compatible version: 5.0

Transmission distance: 15m (no shielding)

Volume adjustment: encoder 360 degrees stepless tuning

Audio input: Bluetooth-compatible +AUX+ USB disk +USB sound card

Audio output: passive speaker +3.5mm

Audio interface: None

Output power: 100W*2

Output filter: filter free

Heat dissipation mode: heat sink + shell

Protection mechanism: power reverse connection protection, short circuit protection, self-recovery overheating protection

Complimentary cool features: The mobile APP supports for Android/iOS

12V-8 Ohm 12W +12W, 4 Ohm 22W +22W

19V-8 Ohm 28W+28W, 4 Ohm 55W+55W

22V-8 Ohm 37W+37W, 4 Ohm 72W+72W

24V-8 Ohm 51W +51W, 4 Ohm 100W +100W

Size (with shell) : 58mm*53mm*18mm/2.2X2.1X0.7in

Weight: 70g

Note:

The output power of the power supply should be greater than the output power of the amplifier, otherwise it will affect the sound quality

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.

NOTE:

1.For DIY---The outer casing is a material package, It needs to be assembled by itself, and the material package is given a screwdriver.

2.---Attention!The heat sink tape 3M glue needs to be pasted to the chip by itself. Please refer to the picture in the description. The hotter the more sticky the thermal conductivity is.The shell version needs to be assembled by yourself. Screwdriver is given with the shell version.

3.For use---The power switch on the board is standby switch. After the switch is off, the machine is in standby state with low power consumption. If the power is completely turned off or the DC plug on the machine can be unplugged for a long time.