






GNSS Antenna Receiver AG30 with Multiple Satellites Multiple Frequencies Full Frequency Band for Geodetic Mapping
151.23$
65.03$
Quantity:
1
Availability:
100+In StockColor
Delivery estimate
Delivery:
Nov 29 – Dec 4 to United States
1.99$ shippingTrackedImport duties may applyFeatures:
This is a for multi-star multi-frequency for GNSS measurement antenna, supporting Beidou II, for GPS and for GLONASS L1/L2 band satellite navigation signal reception. It can be widely used in high- for precision navigation and positioning occasions such as geodetic surveying and mapping, marine surveying, for precision agriculture, deformation monitoring, . The bottom of the product is equipped with 3 magnets and a standard 5/8-11 large nut for easy installation.
Technical features
1: The multi-feed point design ensures the right-hand circular polarization and phase center performance, and reduces the for impact of measurement errors;
2: The antenna unit has high gain and good reception effect for low-elevation satellite signals, that the number of available satellites in the for system is sufficient;
3: The low-noise Receiver adopts pre-filtering technology to effectively suppress out-of-band interference signals and improve the reliability of the system;
4: The shell is IP67 protected, which provides a guarantee for the long-term field operation of the antenna.
Antenna structure: four feed points, double-layer superposition structure
Supported satellite signals: GPS: L1/L2/L5; BDS: B1/B2/B3; GLONASS: G1/G2/G3;
for Galileo: El/E5a/E5b/E6; L-Band
Maximum gain ≥5.0dBi@Fc
Polarization: right-hand circular polarization (RHCP)
Antenna axis ratio @ : ≤1.5dB
Horizontal coverage angle: 360°
Characteristic impedance: 50ohm
Phase center error: ≤2.0mm
Phase center repeatability: ≤1.0mm
Working frequency band: 1164MHz~1300MHz; 1525MHz~1621MHz
Low noise Receiver gain LNAGain*40±2.0dB (Typ.@25C)
Group delay difference: ≤5ns
Noise figure: ≤2.0 dB@25°C, Typ.(Pre-filtered)
Output standing wave ratio: ≤1.8:1 typ. 2.0:1max
Operating voltage: 3.0~16V DC
Operating current: 45mA
RF output interface: TNC (Female)
Mounting way: 5/8-11 and magnetic suction cup
Operating temperature: -40°℃~+85℃
Storage temperature: - 45°℃~+85℃
Humidity: 95%No-condensing
Waterproof performance: IP67
Specifications:
Part name: AG-30 for GNSS antenna
Material: Asa
Color: White
Size: Antenna size: Φ152mm*6mm
Package content:
1*Measurement type antenna
Note:
Light and different monitors may cause the color of the items in the picture to be slightly different from the actual item. The allowable measurement error is +/- 1-3 cm.






Specifications
- Brand
- Xinda Ark
- IS It With PCB
- Yes
- Origin
- Mainland China
- GPS type
- Receiver & Antenna
- Choice
- yes
Customer Reviews
3 ratings
I***o
January 10, 2026
Variant: Color:TNC Female
I am using it connected to SONY Spresense. It can receive signals well even indoors.
GNSS Antenna Receiver AG30 with Multiple Satellites Multiple Frequencies Full Frequency Band for Geodetic Mapping
151.23$
65.03$
Quantity:
1
Availability:
100+In StockColor
Delivery estimate
Delivery:
Nov 29 – Dec 4 to United States
1.99$ shippingTrackedImport duties may apply






