











Jelly Cleaning Stick for Digital Devices Camera Sensor Cleaner Swab Lens Dust Remover Gel Pen Care Tools Accessories Equipment
9.18$
4.5$
Quantity:
1
Availability:
Out of StockColor
Delivery estimate
Delivery:
Frequently Asked Questions
Q1: Will the jelly tip leave sticky glue or oily residue on my camera lens coating?
A: No. The tip is made of a cohesive, non-migrating optical polyurethane gel, not a pressure-sensitive chemical glue. It generates adhesion through molecular surface contact, lifting away cleanly without residue.
Q2: Can I drag or scrub this stick across the lens like a cotton swab?
A: No. Always use a vertical "touch-and-lift" method. Pressing and lifting pulls dust off the glass without dragging sharp particles across anti-reflective coatings.
Q3: Is this stick safe for mirrorless camera image sensors?
A: It is primarily designed for exterior optical glass, filters, viewfinders, and sensor glass filters. For direct low-pass filter or sensor cleaning, use very light vertical contact only—never twist or drag—and ensure sensor-cleaning mode or IBIS lock is active.
Q4: Will the gel head melt or become overly sticky in hot weather inside a camera bag?
A: No. The silicone-polyurethane polymer maintains structural stability across normal operating temperatures (-10°C to 45°C). Keep the protective cap fastened when stored in your gear pouch.
Key Features & Benefits
Calibrated Micro-Adhesion Gel: Lifts micro-dust, pollen, and abrasive particles upon contact without rubbing or scouring optical glass surfaces.
Safe on Multi-Coated Optics: Free of harsh chemicals; safe for fluoride, anti-reflective, and hydrophobic lens coatings.
Zero Chemical Residue: Specially formulated polyurethane compound leaves no oily film, tacky spots, or solvent drying rings.
Precision Reach for Tight Edges: The compact, rounded jelly tip cleans lens bevel rims, viewfinder eyecups, and filter threading effortlessly.
Protective Storage Design: Each stick includes a protective cap to keep the gel surface clean, lint-free, and ready for camera-bag transport.
How to Use (Instruction Manual)
Step 1: Pre-Clean Loose Grit 💨
Use an optical air bulb blower to dislodge large, loose particles from the lens or optical glass.
Step 2: Gently Press and Lift 🎯
Remove the protective cap. Press the jelly head gently onto the dust particle with light vertical pressure, then lift straight up. Avoid scrubbing or dragging across the glass.
Step 3: Repeat for Spot Removal 🔄
Continue vertical press-and-lift motions across dusty points until the element is clear.
Step 4: Cap and Store 🔒
Replace the protective cap immediately after use to prevent airborne dust accumulation on the gel tip.






Specifications
- Origin
- Mainland China
- Electric
- No
- Product Type
- Camera Sensor Jelly Cleaning Stick
- Material
- Soft Polymer Gel + Plastic Stick
- Performance
- Physical High-Tack Dust Lift
- Main Function
- Sensor & Lens Dust Removal
- Target Items
- Camera CMOS, Lenses & Screens
- Cleaning Action
- Vertical Press-and-Lift (Non-Abrasive)
- Packaging
- 24-Piece Pack Box
- Choice
- yes
Customer Reviews
No reviews yet
Jelly Cleaning Stick for Digital Devices Camera Sensor Cleaner Swab Lens Dust Remover Gel Pen Care Tools Accessories Equipment
9.18$
4.5$
Quantity:
1
Availability:
Out of StockColor
Delivery estimate
Delivery:







