






12M Waterproof Infrared Sensor Photocell for Automatic Gate Opener Barrier with Safety Beam Infrared Photocell Sensor Battery
22.41$
11.2$
Quantity:
1
Availability:
100+In StockDelivery estimate
Delivery:
Nov 29 – Dec 4 to United States
1.99$ shippingTrackedImport duties may applyBattery-powered Motion Sensor Photocell Garage Door Infrared Sensor For Sliding Gate Ir Barrier
Single beam photocell sensor/single beam detector is used for automatic slide door, coil door , garage door windows etc.
Consists of a transmitter and a receiver, and the integrated amplifier can produce infrared beam.
Narrow infrared beam (I or II) can avoid interruption by external light.
Even installed at low height(20-40cm from the floor), the detecting distance can also be guaranteed(5-10meters).
The beam produced by MICROCELL provides a self-detecting function for the sliding doors. Once the self-detecting beam is interrupted, the door will stop closing and reverse rapidly to the utmost width. The door will open until the detecting beam is resumed. When the door completely closes, the detecting beam becomes invalid.







Technical Specification
Working voltage:
Transmitter : 3V (2PCS AAA battery 1.5V LR03), Receiver : 12-24V DC
Working current:
Transmitter < 85µA, Receiver < 30mA (24V DC)
Photocell wavelength:940nm
Angle of emission:≤±5°
Receiving range:> 12m
Relay contact loading capacity:1A/30VDC
Size:100*40*35mm


Safety Instruction
1.For security, please read the user manual carefully before initial operation;
2.This photocell is without any fuse,so Please make sure the power is off before installation;
3.Only used this system that do not cause any danger life or property during the running failure or its security risks eliminated;
4.Please guarantee the products used in effective working range
Picture Display

Installation instruction
4.1 Receive module J4 in above picture is the option switch for NO and NC of photocell switch.
4.1.1When the short circuit cap on NO,it is normally open.
4.1.2 When the short circuit cap on NC,it is normally closed.
4.2 Installation
4.2.1 The photocell should be installed more than 20cm above the ground (to avoid reflection), and the distance between emitter
and receiver should be more than 50cm.
4.2.2 End user should install the photocell receiver on the back of the direct sunlight or other strong light source(±5-) to keep photocell work well steadily.


Specifications
- Origin
- Mainland China
- Smart home platform
- Other
- Certification
- CE
- Receiving range
- more than 12m
- Receiver Working current
- Less than 30mA (24V DC)
- Receiver Working voltage
- 12-24V DC
- waterproof
- IP54
- Size
- 100*40*35mm
Customer Reviews
7 ratings
V***v
April 7, 2026
Not working. Works only on normal open contact. Doesn’t work on normal closed. Bad product.seller doesn’t want to refund also.
12M Waterproof Infrared Sensor Photocell for Automatic Gate Opener Barrier with Safety Beam Infrared Photocell Sensor Battery
22.41$
11.2$
Quantity:
1
Availability:
100+In StockDelivery estimate
Delivery:
Nov 29 – Dec 4 to United States
1.99$ shippingTrackedImport duties may apply![50pcs] 215NFC electronic tag cell phone NFC Ntag round card game card shortcut command music wall share ios shortcut](/_next/image?url=https%3A%2F%2Fcdn.westbazaar.com%2Fproducts%2F525909808%2F4f7ba068.jpg&w=3840&q=75)






