











Output DC12V 24V Swing Gate Control Board Connect Backup Battery or Solar System with Remote Control Amount Optional
287.98$
143.99$
Quantity:
1
Availability:
Limited StockColor
Delivery estimate
Delivery:
Nov 27 – Dec 3 to United States
1.99$ shippingTrackedImport duties may applyPlease note
This PCB control board can only use the remote control in our photo, it cannot be used with other remote controls

Specifications:
1. Material: High-quality PCB Board
2. Power supply: AC 24V, Available for adding 24V backup battery.
3. Application: Used for double or single DC 12-24V gate opener.
4. Encoder For transmitter: 433.92mhz rolling code.
5. Allowed Transmitters Quantity: Up to 120PCS.
6. Speed -adjustable function.
7. Auto closing/opening,opening/closing delay time adjustment.
8. Adjustable Residence sensitivity.
9.Terminals available for loop detector, photocell, push button, keypad, access control equipment
10. Digital LED Menu brings a easy setting, plug and play.
11. Open/Close single leaf or double leaves.
12. Total 60's working time to protect the motors.



Technical Parameters:
1.Control panel voltage input: 24VDCAC. Can connect 2PCS 12V 9AH back up battery.
Note that the control board purchased separately needs to be used with a transformer, and cannot be directly 100-250V AC.
2.Motor's voltage: 12-24VDC support.The input of the control board is 24V, and the output is 12-24V.
3.Encoder for transmitter: Use our own customized rolling code.(Encrypted code, no copying and non-branding of our products )
4.Range of application: Suit for our double arms swing gate openers.
*The Linear Spiral 24V Straight Brush Arm is supported, but only fully works with our products, and is not covered by the warranty if tested on a non-ours product.
Functions and testing:
1. MOTOR 1: Master gate, close first & open last.This terminal connect 1st red wire
(counted from your left hand side to right hand side)
2. MOTOR2(DELAY) : Slave gate, open first & close last.This terminal connect 1st
blue wire (counted from your left hand side to right hand side).
NOTE! If you only have a single gate, the motor only can connect to the Motor 2
Delay terminal.
3. 2 SIDE: It is for connecting to any external device that operates a double gate.
4. COM:It is for connecting to the “ ground ”.
5. 1 SIDE: It is for connecting to any external device that operates the single gate.
6. Swipe Card: It is for connecting to any external devices to open the gate.
7. COM:It is for connecting to the “ ground ” external device.
8. IR: Infrared terminal is for connecting to the safety beam.
9. 12V: The output is for connecting to the photocell sensor, continuous output
current <=200mA. (24V DC output, current is 1A)
10. 24Vbattery +: It is for connecting the backup battery +.
11. 24Vbattery-: It is for connecting the backup battery-.
12. 24V: 24V DC output is for connecting to an external device. (such as photocell
sensor, max current output 1A)
13. GND: It is for connecting to the “ ground ” of an external device.
14. 24VLAMP+: It is for connecting to the flash light +.
15. 24VLAMP-: It is for connecting to the flash light-.
16. LOCK(NF): The NF terminal which used for connecting to the electric lock.
17. COM(24V): COMMONused for connecting to the“ground”of the lock.
18. LOCK(NA): The NA terminal which used for connecting to the magnetic lock.
19. GND: It is for connecting to the “ ground ” of the alarm system.
20. SP: It is 24V DC output connecting with the alarm system.
21. AC 24V:It is for connecting with the transformer.
22. Digital display: It is for showing you the setting data.
23. INC+: It is for figure increasing of setting the data.
24. FUN: Used for enter the menu setting and confirm the data.
25. DEC-: It is for figure decreasing of setting the data.
26. Learning button: It is for programming/erasing the remote control.
27. ANT and GND: used to connect with antenna








Specifications
- EU LVD Voltage
- Low voltage: Below 50Vac or 75Vdc
- Voltage
- 5V/2A, 24V
- Origin
- Mainland China
- Model Number
- Swing gate control board
- Certification
- CE
- Security Mode
- Fail Secure with Signal
- Type
- 24V control board
- Use for
- 24V DC swing gate motor
- Frequency
- 433.92Mhz
- Choice
- yes
Customer Reviews
62 ratings
works very well (7)
limited remotes (3)
fast delivery (2)
easy to set up (2)
works well (2)
high quality (2)
Customer photos (3)
h***3
September 29, 2026
Variant: Color:1Control board 1RC
Produit défaillant marche pas, j’attends depuis 1 mois mon remboursement ou de quoi le reenvoyer et récupèrer mon argent, service pas sérieux à chaque fois vous font balader et attendre sans rien resoudre! à éviter
Buyer from Italy
September 7, 2026
Variant: Color:1Control board 2RC
It works great... put in place of the Beninca... you don't even need limit switches.
e***r
August 30, 2026
Variant: Color:1Control board 5RC
Wow, thank you for such an easy to setup. All done within 20min.
R***h
August 13, 2026
Variant: Color:1Control board 3RC
Fastest delivery from Ali express 7 days to delivery in Canada great seller
Buyer from Italy
July 16, 2026
Variant: Color:1Control board 4RC
all' inizio problema di configurazione perché il manuale e in inglese,cmq funziona.
H***n
June 28, 2026
Variant: Color:Only control board
ok
Output DC12V 24V Swing Gate Control Board Connect Backup Battery or Solar System with Remote Control Amount Optional
287.98$
143.99$
Quantity:
1
Availability:
Limited StockColor
Delivery estimate
Delivery:
Nov 27 – Dec 3 to United States
1.99$ shippingTrackedImport duties may apply






