








TinySA 100khz-960mhz Spectrum Analyzer, 2.8-inch Screen Mid-Frequency/High-Frequency/Very High-Frequency UHF AnaLyzer
194.32$
89.39$
Quantity:
1
Availability:
Limited StockColor
Delivery estimate
Delivery:
Delivery estimate shown at checkout
Characteristics:
1. It is equipped with an internal calibration signal generator. When not used as a spectrum analyzer, it can function as a signal generator with two frequency outputs: medium frequency/high frequency /VHF sine output ranging from 0.1MHZ to 350MHz, and UHF square wave output ranging from 240MHz to 960MHz. It is used for automatic self-checking and low-input calibration.
2. This spectrum analyzer features two inputs: a high-quality MF/HF/VHF input ranging from 0.1MHZ to 350MHZ and a low-quality UHF input from 240MHZ to 960MHz.
3.PC control. This spectrum analyzer can be connected to a PC via USB and implements the USB Serial communication (CDC) protocol, which can invoke a large number of commands. After connecting to the computer, the driver will be downloaded automatically.
4.ESD protection function. The latest version
3.1 features a brand-new ESD protection function, with diodes installed, which endows it with more sensitive response performance, efficient anti-static level, better quality and longer service life.
5. Connect to a PC via USB to become a spectrum analyzer controlled by a PC.The rechargeable battery allows for at least 2 hours of portable use.
Specification:
- Material: ABS
- Colour: Black
- Battery: 1* lithium battery, 650mAh (inclusive)
- Packaging size: 200*120*30mm/7.9*4.7*1.2in
- Packaging weight: 250 grams /8.8 ounces


Technical indicators:
- User interface
- The display resolution is 320*240 pixels
- Screen diagonal: 2.8"
- Each RGB pixel is 16 bits
- Resistance touch control
- Point-action switch control
- USB serial port control
- Optional TTL USART ports on the internal PCB (software not yet implemented)
- Linear power supply for suppressing switching noise
The input/output specifications of tinySA are divided into four modes.
- The input frequency range is from 100KHz to 350MHz.
- When the input attenuation is set to 10dB or more, the input impedance is 50 ohms.
- The input attenuation can be selected between 0dB and 31dB manually or automatically, with a step size of 1dB.
- Absolute maximum input level, no attenuation +10dBm.
- Absolute maximum input power, short-term attenuation 30dB, attenuation +20dBm.
- The input interception point of the third-order modulation product (IIP3) has a 0dB attenuation of +15dBm.
At the 1dB compression point of +2dBm, the attenuation is 0dB.
The power detector has a resolution of 0.5dB and a linear frequency of +/-1dB.
The absolute power level accuracy after power level calibration by +/-1dB.
Use the lowest resolvable signal with a resolution bandwidth of -102 DBM at 30KHz.
The frequency accuracy is equal to the selected resolution bandwidth.
The phase noise at 100 KHZ offset is -90dB/Hz, and at 1MHz offset it is -115dB/Hz.
When a resolution bandwidth of 70dB at 30KHz is used, there is no stray dynamic range.
Manual selectable resolution filters at 3, 10, 30, 100, 300, and 600KHz. Automatically select one of the 57 resolution filters.
The screen resolution of 51, 101, 145 or 290 measurement points.
Using the filter with the highest resolution, the scanning speed exceeds 1000 points per second.
Automatically optimize the actual scanning points to ensure coverage of the entire scanning range, regardless of the selected resolution and bandwidth.
Spurious suppression options are used to evaluate whether certain signals are internally generated or actually exist in the input signal.
High input mode specification:
The input frequency range is from 240MHz to 960MHz.
The input impedance is related to the frequency and deviates by 50ohm.
Due to the absence of an input band filter, strong input signals outside the 240MHz to 960MHz range may cause distortion of the in-band signal.
Absolute maximum input level, no attenuation +10dBm.
The input intercept point of the third-order modulation product (IIP3) is -5 DBM.
The 1dB compression point is -6 DBM with no attenuation.
The power detector has a resolution of 0.5dB and a linear frequency of +/-1dB.
The absolute power level accuracy after power level calibration by +/-1dB.
The minimum recognizable signal using a 30KHz resolution bandwidth of -115 DBM.
The frequency accuracy is equal to the selected resolution bandwidth.
When using a 30KHz resolution bandwidth of 50dB, there is no stray dynamic range.
Manual selectable resolution filters at 3, 10, 30, 100, 300, and 600KHz. Automatically select one of the 57 resolution filters.
Optional 25dB to 40dB frequency-dependent input attenuators are available. The power stage error of this attenuator increases to +/-10dB when activated.
The screen resolution of 51, 101, 145 or 290 measurement points.
Using the filter with the highest resolution, the scanning speed exceeds 1000 points per second.
Automatically optimize the actual scanning points to ensure coverage of the entire scanning range, regardless of the selected resolution and bandwidth.
Low output mode specification:
A sinusoidal output with harmonics 40dB lower than the fundamental.
The output frequency range is from 100KHz to 350MHz.
The output level can be selected in 1dB steps between -76 DBM and -6 DBM.
Optional AM, narrow FM and wide FM modulation or slow sweep within the optional frequency range.
The optional output level offers maximum scanning across the entire output level range.
High output mode specification:
Square wave output.
- The output frequency range is from 240MHz to 960MHz.
- The output level can be selected in variable increments between -38 DBM and +13dBm.
- Narrow and wide frequency modulation or slow sweep within the selectable frequency range are available.
Reference generator specifications:
1. Optional square wave output with a fundamental wave of -25 DBM, connected to high input/output.
2. The frequency can be set to 1MHz, 2MHz, 4MHz, 10MHz, 15MHz or 30MHz.


Battery specification:
- The maximum charging time on a 500mA minimum USB port or USB charger is 1 hour.
- Run on a fully charged battery for at least 2 hours.
List of items:
- 1 x spectrum analyzer
- 2 x shape memory alloy cables and barrel connectors
- One antenna with a shape memory alloy connector
- 1 x USB-C cable
- 1 x Touchscreen baffle


Specifications
- Semi-finishedproduct
- No
- DIY Supplies
- Electrical
- Battery Included
- Yes
- Origin
- Mainland China
- Choice
- yes
Customer Reviews
46 ratings
working perfectly (4)
fast delivery (3)
functions as it should (2)
high value for price (2)
extraordinary performance (1)
difficult to read (1)
Customer photos (10)
Buyer from Japan
October 28, 2026
Variant: Color:Tinysa 2.8 inch
I was surprised that it arrived so quickly after placing the order. I'm going to open it now and use it for various purposes. It's a good product.
J***t
October 1, 2026
Variant: Color:Tinysa 2.8 inch
Everything arrived in order and works as it should. I need to learn how to use it properly.
h***a
August 27, 2026
Variant: Color:Tinysa 2.8 inch
Very good product, I have a lot to learn.
Buyer from Ukraine
August 6, 2026
Variant: Color:Tinysa 2.8 inch
It is stated that it operates up to 960 MHz, but the device actually shows up to 350 MHz. What is the reason for this, and how can I enable this option to reach 960 MHz?
s***s
July 29, 2026
Variant: Color:Tinysa 2.8 inch
Works perfectly so far!
Buyer from Australia
July 8, 2026
Variant: Color:Tinysa 2.8 inch
not 900 Mhz, maximum 350 MHz in setting. garbage fake product.
TinySA 100khz-960mhz Spectrum Analyzer, 2.8-inch Screen Mid-Frequency/High-Frequency/Very High-Frequency UHF AnaLyzer
194.32$
89.39$
Quantity:
1
Availability:
Limited StockColor
Delivery estimate
Delivery:
Delivery estimate shown at checkout







