







Portable TinySA Spectrum Analyzer Upgraded V0.3.1 Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input Signal Generator
178.34$
78.47$
Quantity:
1
Availability:
Limited StockColor
Delivery estimate
Delivery:
Delivery estimate shown at checkout
Features:
- Built-in calibration signal generator, also serving as a dual-frequency signal source: MF/HF/VHF sine output 0.1 – 350 MHz, UHF square wave output 240 – 960 MHz, used for self-checking and low input calibration.
- Dual input channels: MF/HF/VHF input (0.1 – 350 MHz, high quality) and UHF input (240 – 960 MHz).
- Supports PC control: Through USB connection, using USB serial communication (CDC) protocol, supporting command set; after connection, the driver is automatically installed.
- ESD protection (V3.1 version): Added diode protection, enhancing anti-static capability.
- Built-in rechargeable lithium battery, with a battery life of approximately 2 hours (portable use).
Specification:
- Material: ABS
- Color: Black
- Battery: 1×650mAh lithium battery (included)
- Packaging dimensions: Approximately 200×120×30mm
- Packaging weight: Approximately 250g
Technical Specifications (Summary):
- User Interface: 2.8-inch color screen (320×240, 16-bit color), resistive touch, push-button switch, USB serial port control; reserved TTL USART port (software not yet implemented).
- Power Supply: Linear power supply, noise suppression for switch.
Low input mode (0.1 – 350 MHz):
- Input impedance: 50Ω (when attenuation ≥ 10dB)
- Attenuation range: 0 – 31dB, step 1dB (manual/auto)
- Maximum input level: no attenuation +10dBm; short-term attenuation 30dB +20dBm
- IIP3: +15dBm (0dB attenuation); 1dB compression point: +2dBm
- Power accuracy: ±1dB (after calibration); resolution 0.5dB
- Minimum measurable signal: -102dBm (RBW 30kHz)
- Phase noise: -90dBc/Hz@100kHz, -115dBc/Hz@1MHz
- Spurious free dynamic range: 70dB (RBW 30kHz)
- RBW selectable: 3/10/30/100/300/600kHz, select the one automatically
- Scan points: 51/101/145/290; speed ≥ 1000 points/second (highest RBW)
- Supports spurious suppression judgment
High input mode (240–960 MHz):
- Input impedance is frequency-dependent (deviating from 50Ω); no input bandpass filter, strong signals outside the band may cause distortion
- Maximum input level: no attenuation +10dBm
- IIP3: -5dBm; 1dB compression point: -6dBm (no attenuation)
- Power accuracy: ±1dB (after calibration); resolution: 0.5dB
- Minimum measurable signal: -115dBm (RBW 30kHz)
- Spurious free dynamic range: 50dB (RBW 30kHz)
- RBW options are the same as above, automatically select one
- Optional attenuator: 25–40dB (frequency-dependent), after activation, power error increases to ±10dB
- Scan points and speed are the same as above
Low output mode (0.1 – 350 MHz):
- Sine wave output, harmonics < fundamental - 40 dB
- Output level: -76 to -6 dBm, step size 1 dB
- Supports AM, narrow/wide FM modulation and slow scanning, and can synchronously scan the output level
High output mode (240–960 MHz):
- Square wave output
- Output level: -38 to +13 dBm, variable step
- Supports narrow/wide FM modulation and slow scanning
Reference signal source:
- Square wave output (fundamental frequency - 25dBm), with high input/output connection
- Frequency options: 1/2/4/10/15/30 MHz
Battery:
- Charging time: ≤ 1 hour (USB 500mA)
- Battery life: ≥ 2 hours (fully charged)
Packaging list:
- Spectrum analyzer × 1
- SMA cables and barrel connectors × 2
- SMA interface antenna × 1
- USB-C cable × 1
- Touchscreen guard plate × 1






Specifications
- Semi-finishedproduct
- No
- DIY Supplies
- Electrical
- Battery Included
- Yes
- Origin
- Mainland China
- Choice
- yes
Customer Reviews
5 ratings
Customer photos (1)
C***o
October 7, 2026
Variant: Color:Tinysa 2.8 inch
ok
M***a
October 7, 2026
Variant: Color:Tinysa 2.8 inch
ok
I***h
August 28, 2026
Variant: Color:Tinysa 2.8 inch
Everything is great! I recommend it.
Portable TinySA Spectrum Analyzer Upgraded V0.3.1 Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input Signal Generator
178.34$
78.47$
Quantity:
1
Availability:
Limited StockColor
Delivery estimate
Delivery:
Delivery estimate shown at checkout







