Active RF Isolation Distributor RF Splitter for SDR GPSDO Source 100kHz to 150MHz RF Splitter
Quantity:
1
Availability:
Card Payments
Crypto Payments
Easy return
Reliable Shipping
Active RF Isolation Distributor RF Signal Splitter for SDR GPSDO Signal Source 100kHz to 150MHz:
Feature:
1. ACTIVE RF DISTRIBUTION MODULE: The active RF isolation distributor aims to effectively distribute RF signals to multiple channels, providing reliable signal distribution for various devices.
2. WIDE FREQUENCY RANGE: The RF signal isolator operates within a frequency range of 100kHz to 150MHz. It offers minimal insertion loss (80dB), and outstanding output to output isolation (>60dB).
3. INPUT WITH ISOLATOR: The RF signal distributor is equipped with an isolator at the input, effectively suppressing common mode interference and interference from power ground lines.
4. VERSATILE APPLICATIONS: This isolating distributor is widely applicable to various devices that require output distribution and isolation, such as RF signal distribution, radio antennas, SDR (Software Defined Radio), clock sources, GPSDO (GPS Disciplined Oscillator), and signal sources.
5. IMPEDANCE OF 50 OHMS: The active RF isolation distributor ensures an impedance of 50 Ohms for both input and output signals, providing optimal compatibility and performance in RF signal distribution and isolation applications.
Specification:
Item Type: Active RF Isolation Distributor
Material: Alloy
Battery: 3.7V polymer battery x 1
Battery Capacity: 600mAh (shipped with built in battery)
Operating Frequency: 100kHz to 150MHz
Insertion Loss: less than 0.8dB
Isolation Between Output And Input: Better than 80dB
Isolation Between Outputs: Better than 60dB
Package List:
1 x Active RF Isolation Splitter
1 x USB Cable
1 x Storage Bag
:
:
Customer Reviews
10 ratings
fast delivery (2)
compact design (2)
functional (1)
good measurements (1)
signal distortion (1)
Customer photos (1)
R***N
January 19, 2026
The product doesn't work, I don't understand the procedure for returning the product, and apart from robots telling me nonsense, I can't get in touch with anyone. They speak to me in Russian, they speak to me in English, I don't understand anything, I am French. Damn it, I'm speaking in French, answer me in French! Buying on this site is really like Russian roulette, one time it works, six times it doesn't. So I've just lost another twenty or so euros foolishly. Don't buy here, it will be much simpler.
G***u
September 13, 2026
Comes in a quality case and insertion loss, isolation, and SWR measurements were quite good. However, in my particular case, the board was not secured properly to the metal case and it wriggles around inside. So far, I have not run into any problems.
Buyer from Finland
July 4, 2026
Quick delivery. Product looks good. Have not yet tested it in action. P1-P4 SMA jacks are so close together that there is no room for BNC adapters that I was planning to use instead of SMAs. I can only fit two BNC adapters there instead of four.
O***r
June 24, 2026
Fast delivery!
i***r
May 21, 2026
I tested it with a 10MHz signal, it distorts the signal but overall it works.
Buyer from Spain
April 24, 2026
Small in size but effective, it comes with a power cable and carrying case. Covers from 1 MHz to 200 MHz.
Active RF Isolation Distributor RF Splitter for SDR GPSDO Source 100kHz to 150MHz RF Splitter
Quantity:
1
Availability:
