30ml Sewing Machine Oil Universal Lubricating Oil Anti-rust Hair Clipper Trimmer Lubricant Oil for Smooth Running Noiseless

Product Instructions / Directions for Use
1. Power Off & Clean: Step 1. Before performing lubrication and maintenance, be sure to turn off the power of the sewing machine and unplug it. Remove the needle plate and shuttle hook, and use a special brush to thoroughly remove thread ends, cloth scraps, and old oil stains from the shuttle race, feed dog, and various transmission components.
2. Precision Targeting: Step 2. Remove the protective cap from the micro-distance needle head of this product. Align the fine metal needle tip directly with the specified lubrication points of the sewing machine (such as the shuttle race track, needle bar link, upper bearing, etc.). The 1mm micro-distance needle head helps you easily penetrate narrow gaps and achieve precise positioning without dead ends.
3. Controlled Dosage: Step 3. Press the machine lightly and apply only 1-2 drops of lubricant to each lubrication point. This product has excellent penetration and adhesion properties. Do not apply excessively, as excess grease may splash out during high-speed operation, contaminating fabrics or clothing.
4. Even Idle Running / Distribute & Run: Step 4. After the oiling is completed, manually rotate the balance wheel (handwheel) several times to ensure that the lubricating oil fully penetrates into each gear and friction surface. Then, turn on the power and let the sewing machine idle at low speed for 1-2 minutes. Before starting the official sewing, test-stitch a few lines on a scrap of cloth to absorb any residual oil.
5. Sealing Protection / Storage & Safety: Step 5. After use, be sure to immediately snap the red protective cap back onto the needle and keep it placed vertically upwards.
Please store this product in a cool, dry place, keep it away from sources of ignition, and place it where children cannot reach.