For Magnetic Build Plate Double Side 300x300 PET PEO Heated Bed Spring Steel Sheet for 3D Printer LulzBot TAZ Anet A8 PEI Sheet

Size and Applicable printer

300x300mm for Kingroon KP5L

Except above model and also use for other similarly sized hotbed.

If you are not sure which size match your hotbed, please measure again before you place a hotbed sheet.

Instructions:

1. For the first printing, it must be leveled (the distance between the nozzle and the hot bed is generally A4 paper thickness)

2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles

3. Adsorb the PEI side or the PET side spring steel plate on the magnetic base

4. Start printing, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (do not exceed 80°C)

5. Take off the printing surface and bend it gently to achieve easy demoulding.

Advantage:

1. Double-sided printing, convenient and practical

2, High temperature resistance, scratch resistance, no deformation

3. No glue, easy to use

4. Anti-warping and strong stickiness

5, Stainless spring steel, good flatness

6. The printed model can be removed without the help of other tools, can be bent and returned to a flat state, no

loss mode

7. Easy to clean, just wipe it off with a wet tissue or alcohol before printing

Note 1:

DO NOT USE ACETONE ON POWDER COATED PEI SIDE!!!!

Note 2:

PET and PEI must be used with the magnetic base. Please make sure you already have a magnetic base at home before you buy

the one without magnetic base.

Package including:

1. Without magnetic base: one piece Spring Steel Build Plate Sheet.