






SHT31 Digital Temperature Humidity Sensor I2C Module ±0.3℃ for Ardniuo Raspberry Pi Smart Home Weather Station
7.66$
3.83$
Quantity:
1
Availability:
50+In StockDelivery estimate
Delivery:
Delivery estimate shown at checkout
SHT31 Description:
Sensiron Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally we have some that have a true I2C interface for easy reading. The SHT31-D sensor has an excellent ±2% relative humidity and ±0.3°C accuracy for most uses.
Unlike earlier SHT sensors, this sensor has a true I2C interface, and (bonus!) even with two address options. It also is 3V or 5V compliant, so you can power and communicate with it using just about any microcontroller or microcomputer.
Such a lovely chip - so we spun up a breakout board with the SHT31-D and some supporting circuitry such as pullup resistors and capacitors. Each order comes with one fully assembled and tested PCB breakout and a small piece of header. You'll need to solder the header onto the PCB but it's fairly easy and takes only a few minutes even for a beginner.
Power Pins:
Vin - this is the power pin. The chip can use 2.5-5VDC for power. To power the board, give it the same power as the logic level of your microcontroller - e.g. for a 5V micro like for Arduino, use 5V. For a 3.3V controller like a Raspbery Pi, connect to 3.3V
GND - common ground for power and logic
I2C Logic pins:
SCL - I2C clock pin, connect to your microcontrollers I2C clock line. This pin has a 10K pullup resistor to Vin
SDA - I2C data pin, connect to your microcontrollers I2C data line. This pin has a 10K pullup resistor to Vin
Other Pins:
ADR - This is the I2C address selection pin. This pin has a 10K pull down resistor to make the default I2C address 0x44. You can tie this pin to Vin to make the address 0x45
RST - Hardware reset pint. Has a 10K pullup on it to make the chip active by default. Connect to ground to do a hardware reset!
ALR - Alert/Interrupt output. You can set up the sensor to alert you when an event has occured. Check the datasheet for how you can set up the alerts



Specifications
- Brand
- DIYUSER
- Origin
- Mainland China
- Output
- Digital Sensor
- Theory
- Hall Sensor
- Type
- Humidity Sensor
- is_customized
- Yes
- Use
- Temperature Sensor
- Material
- Polymer
- Choice
- yes
Customer Reviews
11 ratings
easy integration (1)
wide compatibility (1)
well-designed breakout (1)
simple installation (1)
high accuracy (1)
Customer photos (2)
Buyer from Slovakia
March 19, 2026
very good
A***c
January 21, 2026
👍
X***r
January 6, 2026
Excellent Sensirion temperature and humidity module. This is one of the most accurate sensors I have tested for my monitoring projects. Technical points retained: Accuracy: Very high performance with ±2% relative humidity and ±0.3 ° C of accuracy. Compatibility: The module accepts a voltage of 2.5V to 5VDC, making it compatible with the vast majority of microcontrollers (Arduino, Raspberry Pi, ESP32). I2C Interface: True I2C interface with two address options (0x44 by default, 0x45 via ADR pin). Very easy to integrate. Design: The breakout is well designed with onboard pullup resistors and capacitors. The extra pins (RST for reset and ALR for alerts) are real bonuses. Installation : Simple and fast mounting, quality PCB with header provided for soldering Compliant product, tested and validated. Essential for high-precision environmental measurements.
SHT31 Digital Temperature Humidity Sensor I2C Module ±0.3℃ for Ardniuo Raspberry Pi Smart Home Weather Station
7.66$
3.83$
Quantity:
1
Availability:
50+In StockDelivery estimate
Delivery:
Delivery estimate shown at checkout







