














Alutech 433 MHz Garage Door Remote Control AT-4L Is Compatible with AR-1-500, 500N, AN-MOTORS, ASG-600, AT-4, and AT-4N.
36.94$
16.62$
Quantity:
1
Availability:
1000+In StockColor
Voltage/Plug Type
Delivery estimate
Delivery:
Delivery estimate shown at checkout
I. Detailed Hardware & Electrical Specifications
1. Core Electrical Specifications Table
Project Parameter Details
Product Model AT-4L
Radio Frequency 433.92 MHz (compatible with ALUTECH same-frequency automatic door / garage door control system)
Operating Voltage 3VDC
Compatible Battery CR2032 button cell battery
Coding Method Dynamic code (Dynamic code, prevents signal copying, high security level for anti-theft)
Number of Channels 4 independent control channels, can separately manage up to 4 curtain doors, garage doors, and gate control devices
Transmission Range In open environment, the regular transmission distance can reach 50-100m (affected by obstructions and environmental interference will be attenuated)
Production Information ALUTECH brand design, assembled in China, production date and batch format: month/year (e.g., packaging 02/2025 represents production in February 2025)
2. Appearance Dimensions & Physical Parameters
Body Shape: Rounded pebble streamlined matte plastic body, side with silver-gray decorative strip, standard with hanging rope + metal key ring
Regular body size reference for the same series AT-4 specification: length 65mm × width 35mm × thickness 14mm
Shell Material: Wear-resistant ABS matte engineering plastic, resistant to daily knocks and fingerprint
Key Layout: 4 independent physical keys on the front, top with built-in transmission indicator light, keys with pressing rebound structure
3. Packaging Information
Front and back / side of the packaging box printed with complete brand information, parameters, multi-language instructions (Russian + English), attached QR code for jumping to the official website electronic manual: www.alute.ch/AT-4L/
II. Complete Operating Methods
(1) Battery Installation and Replacement
Use a small cross-head screwdriver to unscrew the 3 screws on the back of the remote control, lift the rear cover
Insert CR2032 button cell battery according to the positive and negative pole markings
Replace the rear cover, screw back the screws, and gently press the button. The top indicator light turns on, indicating normal power supply
(2) Remote Control Pairing Programming (new pairing operation)
Trigger the receiver learning mode: Find the Learn button on the garage door / gate control main board, press for 2 seconds, the main board indicator light flashes rapidly, entering the waiting for pairing state (time limit 5-10 seconds)
Write single-channel key: Immediately press the remote control button you want to bind to this device, hold for 1-2 seconds; see the main board indicator light go out / flash again, indicating successful pairing of this channel
Bind multiple channels separately: Repeat the above steps, pair the remaining 3 keys to other door control devices, each key independently corresponding to 1 set of control equipment
Verify usage: Press the paired button, the corresponding device will perform opening / closing actions, indicating that the programming is complete
(3) Daily Use Operations
Short press the corresponding channel button once: Control the corresponding door to complete opening / closing (some devices support point mode)
Top indicator light on = Wireless signal is being transmitted outward; dim flashing of the indicator light = Battery low, need to replace CR2032 battery
Dynamic rolling code will change the encryption code each time it transmits the signal, cannot be copied by ordinary devices, ensuring usage safety
(4) Troubleshooting Tips
Button pressed but light does not illuminate: Prioritize replacing a new CR2032 battery, check if the positive and negative poles are installed correctly
Light on but door does not move: ① Confirm that the frequency 433.92 MHz is matched with the controller; ② Re-run the pairing process; ③ Shorten the distance between the remote control and the door body, avoiding walls, metal obstructions
Signal range becomes shorter: Mostly due to low battery voltage, replacing the battery can restore the transmission intensity
III. Supplementary Translation of Multi-Language Information in Packaging
Russian text: PULT DISTANT CONTROL 4-CHANNEL = 4-channel remote control receiver; Attractive design Dynamic code = Elegant appearance design, dynamic encryption encoding







Specifications
- Brand
- LTTZ
- Form-factor
- Cover
- Use
- Universal
- Origin
- Mainland China
- Wireless Communication
- RF
- Support APP
- No
- Certification
- CE
- Frequency
- 433 MHz
Customer Reviews
No reviews yet
Alutech 433 MHz Garage Door Remote Control AT-4L Is Compatible with AR-1-500, 500N, AN-MOTORS, ASG-600, AT-4, and AT-4N.
36.94$
16.62$
Quantity:
1
Availability:
1000+In StockColor
Voltage/Plug Type
Delivery estimate
Delivery:
Delivery estimate shown at checkout







