3.9mm 5 Million Pixels HD Two-Way Rotary 360° Industrial Piping Endoscope Camera Borescope Inspection With 5.0 Inch

Attention

When the temperature of the product equipment reaches 75 ° C, the equipment will sound an alarm; If the probe temperature exceeds 80 ℃, the probe will stop working. If the screen appears blurry, it is because the high temperature has burned out the lens. So please note that the temperature must not exceed 80 ℃

2. The waterproof rating of the lens is IP67. Please note that it is not allowed to work in deep water, otherwise the screen will appear blurry due to water droplets.

3. This is an endoscope for long wires. To avoid equipment damage caused by operational errors, please straighten and straighten the cable before turning it. Do not roll up the cable and turn it around, as this may damage the steel wire. The longer the line, the greater the resistance, and the turning angle will decrease. Please follow the video below to receive the goods. Thank you, I wish you a happy life! Work is going smoothly!

3.9mm Two-Way Rotary 360° Industrial Piping Endoscope Camera Borescope Inspection with 5.0 Inch IPS Screen HD 1080

Feature

【Equipped with over temperature alarm】3000 times/minute recognition, 5.0 inch screen at 360 °, IPS screen with bright colors, 3.9mm lens high-density tungsten wire weaving.

【3.9mm tungsten wire braided tube】 Using a high-density tungsten wire braided tube rotating probe, it has a long service life, is wear-resistant, corrosion-resistant, and high-temperature resistant. The optimal focal length is 2-10cm, with a maximum bending angle of 210 °.

【1080P high-definition probe】The endoscope probe uses a CMOS sensing chip, which can capture 5 million pixel clear images and 1080P high-definition smooth videos.

【The 5.0 inch IPS screen has bright colors】providing a wide viewing angle of 178 °, with accurate colors, you can also see the screen content clearly in the scorching sunlight.

【360 ° joystick control】The 360 ° joystick can be adjusted at any angle, allowing the probe to achieve a 360 ° panoramic view and a 210 ° bend back for more inspection details.

【3000 times/minute temperature recognition frequency】The endoscope probe is designed with unique temperature protection technology, which can be used even in harsh environments. When the temperature reaches 75 ℃, the device will issue an alarm and the probe will stop working if it exceeds 80 ℃. There are short-circuit protection, overtemperature protection, output overcurrent protection, input overcurrent protection, anti-interference protection, overvoltage protection, overvoltage protection, low ripple protection, and anti-static protection.

【2000mAH battery with 3H endurance】Built in 2000mAh battery, supporting up to 3 hours of usage time.

【 Wide range of application scenarios 】Widely applicable for various scenarios such as engine interior, car, indoor pipeline inspection, house mold inspection, wiring, sewage, etc., such as car maintenance, carbon accumulation inspection, home appliance maintenance, and blockage troubleshooting.