Salange Projector Screen ,60 84 100 Inch Reflective Fabric Cloth Projection Screen For YG300 Projetor XGIMI DLP LED Home Theater

Salange Projector Screen,60 84 100 inches Reflective Fabric Cloth Projection Screen For YG300 Projetor XGIMI DLP LED Home Theater








 

Parameter of Size

 



Description

1. Product name: Ambient light rejecting grey projector screen

2. Screen material: PET Fabric + Light Resistant Coating

3. Viewing Angle: 30-40 degree

4. Thickness: 0.49mm

5. Fabric Color: Front: Dark Grey

6. Moisture Resistant: YES

7. Ironable: YES

8. Fabric Features: Ultra- short throw, Ambient light rejection






Warm Tips:

1. The projector and screen are linear, please try to project the projector directly in the center of the screen This is a reflective screen, It works by reflecting light back to where it was emitted. So you won't get the best viewing if the projector isn't positioned at a specific angle. At the same time, it cannot support the UST projector, because the projection direction of the UST projector is completely different from the conventional projector. The viewing angle is about 30-40 Degree.






2. This Screen adopts high-density fiber material, no smell, and no harm to the human body and health. The metal layer and the bead particles in this screen will increase the brightness. Give you a better experience for watching.






3. Usually, we will cut the size of the screen a little bigger, if have a 1-3 cm deviation, wish you don't mind it, The measurement allowed error is +/- 1-3 cm.






Package includes:

1 x Salange HX820 Projector Screen;







Note

*Due to the volume limit, we will fold it for transport. Therefore, there are a few creases when you receive it.

*You can restore the folded screen by iron the back face like the cloth, or binding the screen. When you are using the iron to remove the creases, suggest ironed the iron in medium temperature(below 100℃) and with more patience

Real Shots From Users>>>

How to clean dust, and remove the wrinkles:


1. Please use a dry cloth or a wet cloth, if you can't clean the dust, please contact our customer service;

2. You can restore the folded screen by ironing the back like the cloth or binding the screen. Before you iron, please use a wet cloth to wipe the screen. When you are using the iron to remove the creases, suggest ironing the iron at medium temperature(below 90℃) and with more patience.

We suggest you install it on a frame (made of woods, not included in the package)

The projector and screen are linear, please try to project the projector directly in the center of the screen This is a reflective screen, It works by reflecting light back to where it was emitted. So you won't get the best viewing if the projector isn't positioned at a specific angle. At the same time, it cannot support the UST projector, because the projection direction of the UST projector is completely different from the conventional projector. The viewing angle is about 30-40 Degree.

If you care about the
narrow viewing angle
, you could try the backside. The following picture is from one customer, the projection effect is also good.

Some Photos From Buyers>>>