Car Electromagnetic Parking Sensor No Drill Hole Car Reverse Parking Radar Sensors Backup Radar System Easy Install

Installation:

To safety test the U301,the vehicle's engine MUST BE OFF and the parking brake must be engaged.

*Turn the vehicle's ignition key to the ON position,but do not start the engine.

*Place the vehicle's transmission in reverse gear.

*Stand about 6 feet away from the bumper and slowly approach the vehicle.

*At distance from 27.5 to 15.75 inches,you will hear a fast beep. At distance from 15.75 to 8.0 inches, you will hear a continuous beep.

*Note:Bumper does not need to be removed. No holes need to be drilled.

Features:

1. Electromagnetic induction, obstacles can be sensed in all directions, no dead ends.

2. Paste on the bumper of the car, without drilling, and will not damage the appearance of the car.

3. Alarm mode, buzzer

4. Reliable quality and easy installation.

5. Neutral packaging

Specifications:

Alarm prompt: Yes

Detection range: 75cm

Power supply voltage: 12V

Working temperature: -30-40 °

Notes:

1. Manual measuring, please allow 1 ~ 3mm error, thank you.

2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the

style is the same as shown in the picture.