Ohm Range Converter Fuel Gauge Interface Module Ohm190/240OHM Fuel Meter Signal Converter Fuel Tank Interface for Any Fuel Gauge

Feature :

1. Acts as Interface Between Fuel Senders & Gauges
2. Reads any fuel sender
3. Works with any fuel gauge
4. Accurately Corrects OHM Mismatch & Erratic Movement from Fuel Slosh
5. Custom Calibration for empty, half level and full
6. Mini Size 20(w) x 16(H) x35(L) mm

- Fuel Gauges are designed to work with a specific ohm range.
- Different automobile and gauge manufacturers use different ohm ranges to correctly operate their gauges. This can cause problems for a person who is updating their vehicle with new gauges or a new gas tank and fuel sender.
- This module will allow you to use your stock sender with any fuel gauge and vice versa.

Instructions

1/Mount module in a clean dry cool position.
2/Connect wires as guide photo above
3/Using store mode,program and store Full,Half,Empty and “Power on” positions.
4/Using power on mode,program how you want the gauge to operate when car is started.
5/Operated in run mode and check.