Pair Of Car Tail Light Assembly For Volkswagen VW Golf 7 Mk7 Golf 7.5 Mk7.5 2013 2014-2020 LED Brake Flowing Water Flicker

Full Set Left Right LED Tail Lights For Volkswagen VW Golf 7 MK7 Golf VII 2013-2017 Golf 7.5 MK7.5 2017-2020 Dynamic Turn Signal Sequential Flowing Water Flicker DRL Brake Reverse Fog Rear Tail Lamp Assembly Plug and Play Car Accessories Not for Variant

P.S:

-This product has not start-up animation! But they have dynamic turning signals.

Suitable For Cars:

For VW Volkswagen Golf 7 2013 2014 2015 2016 2017

For VW Volkswagen Golf 7.5 2017 2018 2019 2020

Kind Note:

-This Pair of lights have E-mark.

-This product is not compatible with the following cars:

For VW Golf 7 Variant Alltrack 2014–2018

For VW Golf 7 e-Golf 2014–2020

For VW Golf 7 Sportsvan 2013–2020

For VW Golf 7 Variant 2013–2020

For VW Golf 7.5 GTI 2017-2020

For VW Golf 7.5 R 2017-2020

Special case:

US version Golf 7/MK7 GTI 2015-2017, MK7 R 2015-2017 ,MK7 2015-2021, can be adapted, but buyers need to purchase additional DAP adapter cable and decode (Need buyer order it by yourself)

If your car is EU version Golf 7/MK7 GTI 2015-2017, MK7 R 2015-2017 ,MK7 2015-2021, then our product can be installed directly.

For example:

our lights are EU version VW golf 7 standard, VW golf 7 GTI and golf 7 R tail lights, but they are not golf 7 variant led tail lights. if your car meets the requirements, then there is no need coding, they are plug and play.

our lights are also suitable for EU version golf 7.5 standard cars, but don't support golf 7.5 GTI or golf 7.5 R version cars.

Please check if your car is with in the above mentioned list before you placing an order. 

If you're not sure, please contact us before you make the purchase, tell us your car model and year and send us the picture of your car lights to confirm.

-Please DO NOT move the pads on the back of the lights and press the cables on the pads!

Otherwise there will be water in the lights!

Q&A.

-How to connect the Yellow Cables? 

Notice: Only for cars which there is not dynamic turning signals function originally.

If original cars which already have this function, then don't need to connect the yellow cables. 

Please see that there are green ports of the light cable. Use it to connect the one side of yellow cable. 

 Then connect the internal and external lights through the conduit in the trunk to connect other side of green port, following the arrows in the picture attached. Then the dynamic turn signal can work normally.

 Please do this processes for the other side lights. 

-Why the lights have a little bit of damage on the edges?

Answer: Please note that the so-called "scratch" marks on the edges do not necessarily indicate a problem with the product. They are caused by production, such as injection molding and the opening where plastic is introduced into the mold during production, which cannot be avoided. Every product has a so-called "scratch" mark. Please note that!

-If there are lamps don't light on? What should I do?

Answer: Please contact after-sales to describe the question you met and send a video or photos which can show the question, we will provide you after-sales. If there is no evidence, we don't know where is the question, then we can not provide after-sales, hope buyer understand. Thank you.

-There are words on the light, I don't like it.

Answer: These words represent certificate authentication and cannot be removed at will.

-After the product is installed, there are some small gaps.

Answer: This is normal, it is impossible to completely occupy the position of the taillight of your car, if there is no gap, you cannot install the product at all.

If you think the gap is too big, please take a photo and contact after-sales to confirmif this is the question of installation. Because of the problem of installation, it will also cause the problem of excessive gap.

-Will our products leak water or electricity?

Answer: No, our product will not.

If there is a water leakage or electricity leakage, please take a photo and tell us where there is water leakage, which part of the electricity leakage, we can help to check and provide after-sales service.

-Whether the price of the product is the price of a pair?

Answer:YES. It is for a pair of light. It includes 4 parts totally.

-Is the tail light a streamer turn signal? Is it a dynamic light?

Answer:YES. Our product are.

-Why my product's inner parts lights don'y show the dynamic lights?

Answer: Please connect the inner parts and outer parts by using yellow cables which we send you with lights, then all parts lights will show dynamic lights.

-Every product is same. If you find that there is a gap in the installation, it is that there is a problem in the installation. Because all products are produced by the same mold, they are same.

Detailed Parameters:

Material of Base:ABS

Material of Mirror Cap:PMMA and Glass, etc.

Package:each in poly bag and foam, 1 pair/ctn

Special function: It is plug and paly

Advantages:

Function:Car Styling Car tail light assembly Integrated car turning signal light, car Brake light ,car rear parking light, Upgrade LED light source as High quality car Tuning parts

Appearance:Made by thermostable ABS And PMMA/PC Material for LED tail light assembly , apply different color Cover lens , match personalized car led tuning lights

Installation:Car taillight assembly is plug and play ,easy to install ,Good DIY car light assembly with car LED rear lights

Performance:Waterproof IP69 ,with High Quality Sealant; shockproof, 50000 hours Long work life and supper bright LED light .

Guarantee:if the taillight unit not work by non-artificial reason in 1 year ,we will provice repairt service or replace parts / unit

Package Contains:

1 pair of tail light （ include left and right lights, totally 4 parts）

Internal picture of the physical package: