6A 12V Intelligent Car Battery Charger Car and Motorcycle Battery Charging Unit Lead-Acid Battery Repair LCD Display

 Consumption reminder:

Please pay attention to the adaptability of the charger, Keep away from moisture, humidity and shock prevention follow the instructions for the correct use of the product, to eliminate potential safety hazards!

Please note:

You need to clip the clip onto the battery to identify the battery for charging and repair.It is impossible to charge the battery without detecting it.

Specifications:

Name:12V 6A Intelligent Pulse Repair Charger

Material:plastic shell

Size:(L×W×H): 155×8×62mm

Voltage: 12V

Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM, Wet,EFB, etc..

Voltage detection: Yes

Switchmode technology: Yes

Polarity protection: Yes

Output short protection: Yes

Non battery link protection: Yes

Over voltage protection: Yes

Over temperature protection: Yes

Cooling: Fan

Input voltage: AC 110-220V, 50-60Hz

Minimum start voltage: 8.0V

Battery range: 4-100Ah

Thermal protect: 65'C+/-5'C

Efficiency: App. 85%.

Compliant standards: CE,FCC,ROHS,CMA

6A Charge Current :Charge your car or motorcycle battery quickly with a charge current of 6A.

• 12V Battery Voltage :Compatible with 12V batteries, making it suitable for a wide range of vehicles.

• LCD Display :Monitor the charging progress of your battery with the convenient LCD display.

• Smart Repair :Diagnose and repair your battery with ease using the smart repair feature.

• 6A Charging Capacity :Charge your car or motorcycle battery quickly with a charging capacity of 6A.

• Lead-acid Battery Compatibility :Compatible with lead-acid batteries, this charger is perfect for all your charging needs.

Warm tips.

Check whether the rated voltage of the battery to be recharged matches the output voltage of the charger.

the charger and the battery to be recharged correctly connected

Check whether the utility voltage and the rated input voltage of the charger are consistent

Connect to the mains and observe whether the lighted lamp shows the battery charge level and the full charge level flashing indication.

If the charging indicator does not light up, please disconnect the mains supply and check the mains supply, the carp battery and all the connecting wires.

After the battery is fully charged, please disconnect the mains supply and then disconnect the carp battery connecting wires.

Attention：

It is strictly prohibited to insert metal foreign objects into the ventilation holes of the charger, otherwise it may increase the degree,of damage, and may cause personal injury.

If the input/output power cord is damaged, please buy it from the seller, and it is forbidden to replace it with other power cords. 8. When the charger turns from red to green, it should not be unplugged, and should be allowed to trickle charge the battery pack for more than 2 hours.

Do not charge continuously for more than 24 hours

Prohibit charging of non-rechargeable batteries