Ridenow Ultralight Bike TPU Tube 26 /27.5 /29 Inch MTB Bike Inner Tire 45mm/65mm/85mm For Gravel 700c 32c-47c Super Light Tube

We offer discount for large quantity. Welcome to contact with us!

Please note that due to different production batches, you may receive transparent valves or black ones (including some models that may be sent with new packaging), but the product quality is the same, so it is not within the after-sales scope. Buyers who mind, please do not purchase. Thank you very much for your understanding.

This inner tube cannot be inflated a lot when it is not installed in the outer tire, otherwise it will cause irreversible damage!

Please use a manual air pump instead of high-speed air filling equipment such as air compressors or pumps.

Before inflating the RideNow tube, turn the valve inward (towards the center of the tire circle). Inflate a small amount until the inner tube is round; this

pressure should be less than 0.5 bar/8 PSI.

Tire inflation pressure must not exceed 5 bar/72PSI When using rims with a no-ring-lip system according to ISO/TC 31.

Every 3° (5°F) increase in temperature would increase the tire pressure by about 1%.

If you inflate the tires in a cool garage in the morning (18°C / 65°F) and ride later at higher ambient temperatures (35°C / 95°F), it may result in an increase in inner tube pressure (e.g. 0.5 bar/8 PSI).

Especially when riding on high temperature black asphalt pavement with temperature exceeding 65°C (150°F), the tire pressure may easily exceed the allowable maximum value. In addition, too high tire pressure can cause the tire to break away from the rim during cycling, which can result in the risk of injury.

If pneumatic tires are stored at 60°C (140°F) or higher (e.g. in a car in hot weather), deflate the inner tube to 1 bar/15 PSI to avoid valve deformation.

26/27.5inch : Note that 26/27.5 supports 1.3-1.95 specifications, not only the size outside the box

27.5/26inch :26/27.5x1.9-2.5

29inch :29x1.9-2.5

Due to issues with new and old packaging and product production, you may receive black/transparent white air nozzles, or the box may be an old model box, but the product quality is the same. Therefore, it is not within the scope of after-sales service. Buyers who mind this should not place an order.