【EU US】CNC 1.8KW 2.2KW 220V ISO20 Automatic tool change ATC Spindle Motor Water Cooling With FL inverter For Metal Router

Package include:

1 x 1.8KW / 2.2KW ATC Automatic Tool Change Spindle Motor 80mm ISO20 220V,24000rpm

1 x ISO20-ER20-35MS Tool holder with pull stud （ship from DE warehouse ,no this tool holder include）

1 x 2.2KW Fuling Brand VFD Inverter 220V-Optional

1 x 80mm clamp (optional)

1.8KW ISO20 type:

I.   2.2KW ATC Automatic Tool Change Spindle Motor 220V,24000rpm

1. Product overview

1) This spindle is built-in type spindle motor, built-in three asynchronous motors,by theinverter control.As the spindle has a compact structure,high power, big torque, small vibration,low noise characteristics,so it can achieve high speed,high powe cutting,high precision and highstability operation.

2) The bearing of spindle use grease lubricated angular to contact bearings,can beachieved lifelong lubricating within the life cycle.

3) The spindle use forced coolling mode to coolling motor,front and rear bearings.Coolantflow through the reasonable arrangement cycle watercourse of the spindle body,thus can takethe heat generated of the spindle rotation speed, to achieve thermal equilibrium,let spindletemperature within a certain constant value. External cooling device effect:maintaining aconstant temperature of the coolant.

4) The spindle built-in PTC 140 temperature sensor(Technical parameters are visible inother sections of this specification),you can read it anytime if you need to protect the motortemperature.

5) The tool clamping methods:this spindle built-in automatic tool change device,shank form

is ISO20

2. Drawing Size Description

Spindle installation explanation

1)     Circulating Cooling System Description

The system must ensure that the cooling water temperature of supply spindle is between 24-28deg. Usually setting the flow switch in return pipe of the cooling system,to ensure the supply of spindle cooling water. Cooling water requirements: we recommend using distilled water, while recommend Feinuokesi (Fenix) protective agent F1 (using the scale of 1: 200),coolant temperature is 26deg±2deg,inlet, outlet pipe temperature can’t exceed 5 deg.It is allowed As long as other monitoring can ensure fuller spindle cooling.

2) Air sealing control

In order to prevent water or impurities enters internal of the spindle,spindle will have gas sealing device,the gas seal machine must be started start with the machine at the same time. And the need to go through multi-stage filtration.

3) Compressed gas quality requirements

The quality requirement of gas which is used in gas seals:

Oil content:<0.01mg/m3

Solid particle:<5µ m

Pressure dew point: <7.5deg(0.7MPa)

4) Running-in program instructions

Only all monitoring issued no failures operational signals,at the same time,all safety devices have been installed and working properly,then allow start spindle.

Note: New or spindle which is not used for a long time must to be running slowly.First,start run spindle for half an hour as 25% of the maximum speed,then increase  to 50% of the maximum speed,to run 15 minutes,finally, increase to maximum speed.It’s need to check the temperature of the spindle during the whole process, spindle will get hot, but not hot hand, if the spindle becomes hot, pls stop the operation and contact our customer service department.

II.  2.2KW Fuling Brand Inverter VFD

(we will send the detailed manual after you order)

Specifications:

Voltage: 220V

Maximum Speed: 24000rpm

Rated Frequency: 400Hz

Motor Level: Level 2

Rated Power: 1.5KW (S1)

Peak Power: 2.1KW (S6)

Features:

Water Cooled Atc 2.2kw 220v

**Advanced CNC Router Kit for Precision Metalworking**

The 2.2KW Automatic Tool Changer Water Cooled ATC Spindle Motor ISO20 Metal Engraving is a cutting-edge machine tool spindle designed for high-precision metalworking. This robust and reliable spindle motor is built with a compact structure, ensuring high power, big torque, and low vibration for smooth, high-speed cutting. The water-cooled ATC feature maintains optimal performance by dissipating heat efficiently, allowing for consistent operation at 24000rpm.

**Optimized for Efficiency and Durability**

The spindle motor is equipped with a built-in PTC 140 temperature sensor, which helps protect the motor from overheating. The tool clamping method is ISO20, ensuring compatibility with a wide range of tools. The automatic tool change device simplifies the process of tool changes, enhancing productivity and reducing downtime. The spindle's design is optimized for longevity, with grease-lubricated angular contact bearings that provide lifelong lubrication, reducing maintenance requirements.

**Versatile and User-Friendly**

This CNC Router Kit is not only powerful but also user-friendly. The included 2.2KW Fuling Brand VFD Inverter is a high-quality component that enhances the spindle's performance, providing a stable and efficient power supply. The kit is suitable for a variety of materials, including castings, aluminum, glass, and more. The installation process is straightforward, with clear instructions provided for the circulating cooling system and air sealing control. This spindle motor is an essential component for any professional or hobbyist looking to achieve precision metal engraving with ease.