ANYCUBIC Kobra S1 Max 3D Printer, 350℃ Hotend,Hardened Steel Extruder, Up to 600mm/s Printing Speed Build Volume 350×350×350mm

Anycubic Kobra S1 Max

The Grand Design

350x350x350mm³ Print Whatever You Want

Full-sized Helmets and footwear. And that's just the start. Print complex, large models that require zero post-print assembly. They're ready to go right off the plate.

All-Metal CoreXY, Rock-Solid Construction

X-Axis
Increased linear rods spacing for extreme precision & stability

Y-Axis
Dual symmetric drive belts for smooth travel

Z-Axis
10mm reinforced linear rods for enhanced rigidity

First Layer, On Point

The Levi0 3.0 auto-leveling uses 49 measurement points across the entire hotbed to detect and correct even the slightest horizontal deviation, producing a first layer that is consistent, adhesiveand downright impeccable.

Dual-External Circulation Cooling Fans

Dual External Circulation Cooling Fans
Force external cold air into the chamber for rapid heat dissipation and model stabilization, reducingstringing and warping by up to 68%.

Core Cooling Anti-Clog System
Directs rapid external cooling to the throat tube and extruder, preventing heat creep and minimizingclogging.

Flow Dynamics Calibration
Kobra OS uses real-time flow control to perfectly balance speed and extrusion force. Theresult? Unmatched print quality, every time.

Vibration Compensation
The built-in accelerometer detects resonant frequencies to eliminate ghosting and ringing.

Automatic Adaptive Leveling

It automatically identifies the model, calculates the print area, and self-levels, saving you time, effortand a whole lot of quesswork.

Complete Benchy in 15 Mins

12 Times Faster, 80% Less Time
300mm/s default print speed
600mm/s maximum print speed
20000mm/s* maximum acceleration

Top-Grade Hardware for Engineering- Grade Filaments

65℃ Active Chamber Heating + 350℃ High-Temperature Hotend + 120℃ High-Temperature Hotbed; confidently handles engineering-grade filaments while maximizing success rates andstructural integrity.

Hardened Steel Extruder Gear
Handles carbon-fiber filaments effortlessly

Titanium Alloy Throat Tube
Superior thermal barrier prevents clogs

Hardened Steel Nozzle
Handles carbon-fiber filaments effortlessly, with 6x lifespan of brass

Get Great Results with 8 engineering-Grade Filaments

ABS, ASA, PC, PA, PA6-CF, PC-CF/GF, PET-CF

Get Perfect Results with 8 Consumer-Grade Filaments

PLA, PETG, TPU (95A), TPU for ACE, PET, PLA-CF PETG-CF, PVA

Stable, Silent, Super-Efficient
Upgraded 4 independent brushless motors.

Smooth and Stable Feeding
Engjineered for maximum reliability, the new system features four independent brushless motors and a next-generation buffering mechanism, These components work together to ensure smooth, jam-free filament feed and retraction for every channel.

Faster Filament Change
Filament loading speed increased by 100%, saving 77 minutes per 100 filament changes.

​Quiet and Durable
Operates at under 48dB noise level, with independent brushless motors offering a lifespan of ≥5000 hours.

65°C High-Temperature Drying While Printing

Want to print perfect models? filament drying is key. The ACE 2 Pro supports simultaneous dryingand printing, keeping the filaments as fresh as the day they came in.

6 Major Upgrades Easy-to-Print, Hard-to-Mess Up

Unbox & Print in 10 Mins
It comes 95% pre-assembled.

Quick-Release Hotend
Flip and switch! That's all it takes to swap your hotend. The package includes 0.25mm, 0.6mm, and 0.8mm nozzles for quick, precise hardware customizations.

Easy-Access Discharge Chute
The discharge chute is strategically positioned on the left side of the printer for a simple and efficient discharge collection process.

Temperature & Moisture Level Display
View real-time information at a glance.

Activated Carbon Filter
Effectively removing unpleasant odors.Optional upgrade purchase includes HEPA & activated carbon filter.

45dB Quiet Print Mode
Standard Mode:≤48 dB (comparable to a quiet office environment)Quiet Print Mode: As low as 45 dB (comparable to the soft rustling of pages in a library)

Press Start & Leave the Rest to Al

Real-Time Al Monitoring
The in-house algorithm and 720P camera detect anomalies and alert users instantly.Foreign Object Detection: Automatically identifies debris in the printing area to prevent failures or damage.Spaghetti Detection: Al-powered live monitoring prevents spaghetti.Object Skipping: Faulty parts are skipped to ensure printing efficiency.

Auto-Resume, Auto-Recover
After power recovery, the system picks up where it left off and continues to print as if nothing had happened before.

The Ecosystem

Anycubic Slicer Next & Anycubic APP
The Anycubic slicer is preloaded with parameter sets for various materials, making it fullycompatible with mainstream brands. Enjoy consistent, excellent results with just one click.Monitor your prints from anywhere with the Anycubic App. Use remote viewing to check progress inreal-time, or capture and share your journey with built-in time-lapse photography.

Visit Makeronline for More inspirations
MakerOnline offers a qlobal creative community featuring 100,000+ ready-to-print designs from tens of thousands of international designers, offering seamless one-click printing with pre-optimized slicer profiles.

Supports Multiple Connection Options
Triple-Network support: Dual-Band Wi-Fi 6, Ethernet Port & Local Network - ensuring stable filetransfers through different connections.Privacy Protection: Seamless switching between loT cloud platform and LAN modes with dual-layersecurity to safeguard your data privacy.

Product Overview