RESIONE TH72 1K 3D Resin Long-lasting Tough 3d Printer UV Resin For Elegoo Anycubic Resin 3d Photon Resin Photopolymer resin

TH72 is a resin with long-lasting toughness. Don't be too careful when you're playing with the TH72 print, as it won't get damaged easily, and it won't shrink and warp much over long periods of time. It's ideal for printing figurines.

▌ Attention

TH72 requires users to be good at adding supports. For parts with higher height or larger cross-sectional area, it is recommended that the diameter of the supports body be no less than 1.2mm, and the supports should be as many and dense as possible.

For some types of 3d printers, the surface of the printed TH72 resin parts has a silky texture, and the prints will feel slightly sticky after cleaning.

▌ Features

The prints are not easily damaged

 TH72 prints can withstand accidental accidental drops, and it will not be easily damaged during long distance transportation. You can significantly bend or even fold prints with a wall thickness of less than 3mm. It is ideal for printing durable figurines and miniatures.

Long-lasting toughness

TH72 prints will not become brittle over time. After a long time of outdoor environment test in subtropical summer (dozens of days of sunshine and rainy weather) and 8-hour high temperature drying at 50-60 ℃, the prints still maintain toughness and strength, the weather resistance is good.

Hollowed out prints will not crack

Models that have been "hollowed out" usually develop surface cracks over time because their interiors cannot be completely cleaned and post-cured. However, TH72 rarely exhibits this issue, allowing you to save more material.

Low water absorption

With a water absorption rate (48hr) of 0.6%, TH72 performs exceptionally well among 3D printer resins. This ensures that prints do not soften due to increased air humidity or crack from long-term moisture absorption. The prints can be used in short-term underwater operations and outdoor scenarios.

As a toughening agent for other resins

Tests have shown that adding TH72 to rigid/standard resins significantly increases their toughness when TH72 constitutes 40% of the mixed resin, while maintaining sufficient strength.

TH72 is a long-term tough resin, so you don't have to be careful when you play with prints, and it will not be easily damaged during long distance transportation. It is an ideal material for printing hair, capes, swords, etc., as well as static figures and models with hollow interiors, it can also be used as a toughening agent for other resins.

Upgrade Notice

Based on the medium gray version of TH72 resin, we have introduced two new colors: matte gray and white. These new colors of TH72 are easier to clean than the medium gray version, do not have a shiny, reflective, or sticky surface, and have a matte finish. They are also more resistant to yellowing. Additionally, their other properties are the same as the medium gray version.

Printing Settings

Operating Temp: 25~35℃/77~95℉

Layer Height: 0.05mm

Exposure Time: 2.8~4.2s

Bottom Exposure Time: 45~65s

Lifting Height:

LCD Screen size less than 8.9 inches: 6mm

LCD Screen size ≥8.9 inches: ≥10mm

Rest Time After Retract/Off times /Light-off Delay: ≥3s 

"Anti-aliasing"/"Grayscale" remains OFF！

Cleaning and Post-curing

Cleaning tools: Manual cleaning or 2 in 1 Wash Cure Machine

    Cleaning time: ≤5mins

    Cleaning solvent: 95% Ethanol or IPA

    Post-curing light source: 385-405nm UV(40W)

    Post-curing time: 15-30mins