Electric Mason Jar Vacuum Sealer Kit, Cordless, for Mason Jars Wide Mouth Fermentation with Mason

Power supply mode: built-in battery (TP-C charging)

Potência nominal: 20W

Energy: 5W

Shell Material: ABS

Diâmeter layout: 96mm

Função: vácuo

Materials: ABS PCB

Rated frequency: 10W

Single use time: 1-60s (automatic stop)

Standby time: 30 days

Air pump capacity: 500CC

Vacuum flow: 3.5L

Inspiring MPa: -60kpa

AR fire Motor: 370 ar Fire Brigade

Motor voltage: 7.4V

Ruído: <60db

Pressão alívio método: válvula solenóide redefine automaticamente

Display Mode: Battery percentage display/Timing display

Battery: 1200mAH built-in battery

Supply voltage: DC5V/1AType-C

How to use


Place the mason jar lid on top of the jar (not suitable for one-piece caps with rings)



Press the sealer firmly, holding it smooth



Remove the top mason jar sealer to double the effect by adding a ring lid (ring cover not included in our package)



To get the standard mouth seal bottle, simply insert the red arrow into the standard mouth seal converter



Align it with the unlock symbol on the main unit and insert it inside the silicone ring in the wide mouth seal area and squeeze it clockwise



At this point the arrow is aligned with the symbol of the lock, which indicates a successful installation.



Aviso prévio


When filling the soft food or liquid, do not overload the bottle, less air in the bottle, the longer the sealer will work and the sealing effect will be short.



Please check if the bottle mouth is dry and clean. If there is water or debris in the mouth of the bottle, the mason jar sealer will not be able to seal.



The mason jar vacuum sealer did not press in place and did not allow the bottle mouth to enter the sealer completely.



Mason jars don't match the lids.



Note that frequent use can cause the silicone ring inside the mason's bottle vacuum sealer to shift, resulting in seal failure, manually adjust to the original position before use.



Check if the electric vacuum gauge is centered and pressed firmly against the bottle cap, click the button to start the vacuum pump, and wait about 40 seconds or more, and the air can be evacuated to the seal. Clicking on the button closes the sealer again.