LUJINXUN DN40 47mm BSP Thread Heater Element 220V/380V for Water Tank 3KW/4.5KW/6KW/9KW/12KW TEN 201SS Tube Copper Thread 1pc

LUJINXUN DN40 47mm BSP Thread Heater Element 220V/380V for Water Tank 3KW/4.5KW/6KW/9KW/12KW TEN 201SS Tube Copper Thread 1pc

Specifications:

Product Name: Water Heater Element

Tube Length: 195mm/225mm/240mm/285mm/360mm

Tube Diameter: 8mm

Thread Diameter: DN40 (47mm/1.5inch)

Voltage: 220V/380V

Power: 3KW/4.5KW/6KW/9KW/12KW

Tube Material: 201 Stain Steel

Thread Material: Copper

Package Contents: 1x heater/1xsilicone gasket/1xcap

Pay attention:  Power Allowance -10%~+5%

01/Notices:The heaters for water/oil,cannot dry burning,heating in oil keep under 300 degree.

02/Features: SUS304 thickened tube,High temperature resistance wire and high temperature insulation powder.

03/Application:Suitable for Heat-conducting oil stove, large water tank, boiler, reaction kettle.

To dear all,

1. Heaters are industrial products, not vase. some may have flaws, such as weld, such as stainless steel trace and polish trace,that's normal.

2. Because the heating wire inside the heater tube is made of OCr25A15 which is Magnetic, it is normal that the element can be adsorbed by magnet.

3. Under the condition of insulation, the international standard for the heater power accept allowance -10% to 5%.

If you are care about these, please think twice before make order. We do not accept dispute or negative feedback about these.

Thank you for your attention.

Custom Made

We accept for different heaters.if you need custom,please offer drawing,also actual picture will be more helpful.

ln order to improve efficiency,please offer drawing with the following parameter,thanks.

①Thread Size                 example: DN25/DN32/DN40/DN50 ect.

②Tube Length                example: 190mm/210mm/250mm ect.

③Tube Diameter            example: 8mm/10mm/12mm ect.

④Power                        example: 3KW/4.5KW/6KW ect.

⑤Voltage                       example: 220V/380v ect.

⑥Tube Material             example: suS201/SUS304/Copper ect.

Instructions for use
1. Beforeinstallationpleaseusemultimeter to measurethe power. Ifthere is no problem after measured,then can be installed. If there is nopower, please contact with us.2. How to measure the power: Please note: Under the condition of insulation,the International standard for the heaterpower accept allowance -10%~+5%,the heater size accept allowance 0.5mm,Ifyou care about it, please do not makeorder. Thanks:)