Digital LCD Power Meter Wattmeter 220V 110V AC Backlight Electricy Consumption Energy Kilowatt Wattage Measuring Analyzer

Digital LCD Power Meter Wattmeter 220V 110V AC Backlight Electricy Consumption Energy Kilowatt Wattage Measuring Analyzer

Operating voltage: 230V 50Hz for EU / UK/AU plug;120V 60Hz for US plug

Operating current: Max.16A for EU plug,Max.15A for US plug,Max.13A for UK plug,Max.10A for AU plug

Wide voltage range: 230V - 250V for EU / UK /AU plug；110V - 130V for US plug

Timing display range: 0 second----9999 days

Wattage display (watts): 0W----3680W

Voltage display range: 0V----9999V

Current display (amps): 0.0----16.0A

Frequency display: 0Hz----9999Hz

Minimum wattage display range: 0.0W----3680W

Maximum wattage display range: 0.0W----3680W

Price display range: 0.00KWH----99.99KWH

Total kilowatt-hour and cost display: 0.000KWH----9999KWH

DIY supplies: electric

Size: 15.5 * 7.3 * 7.5cm / 6.1 * 2.9 * 3inch

Plug: EU plug / US plug / UK plug / AU plug (optional)

8 Major Functions: measure electricity, measure current, measure voltage, measure power, calculate electricity bill, measure time, measure frequency, measure overload.

Widely used:Applicable to all kinds of charging equipment: refrigerator, mobile phone, electric blanket, etc

Measure voltage, frequency, current, power factor, wattage, minimum & maximum wattage and record cumulative kilowatt-hour kwh, time, date and electricity expenses.

Easy to detect your electricity bill. Electricity price setting by pressing OK, VALUE, DISPLAY and SET button.

Measure various parameters and overload protection function: power (w), energy (kwh), volts, amps, hertz, power factor and maximum power (w), time, days.

Easy to detect your electricity bill. Electricity price setting by pressing OK, VALUE, DISPLAY and SET button.

Overload Display: If the instrument is plugged into an outlet that has over 3680 W, it can cause an overload. This process is indicated by the term in OVERLAOD in the 2nd section t with a booming signal (selectable function)

Large LCD display for easy reading. LCD display with backlight. 

Emergency door:Safety protection door to avoid the danger of contact due to inserting fingers or small objects.

Built-in battery backup: 2 1.5V rechargeable batteries allows meter to be moved and still visible without losing readings.

Reset :If faults appear on the display or the buttons no longer respond, the device must be reset. The reset is done by pressing the RESET button.

Built-in 3.6V rechargeable battery (NI-MH) to store electricity and saving setting.

Display mode:The screen is displayed for approx. 1 minute - afterwards it automatically changes to mode 1 To change from one mode to the other, press the FUNCTION button,

Mode 1: In this mode the following is displayed: time / watt 1 costs / display time (how long) the device is connected to a power source.

Mode 2: In this mode the following is displayed: Time / Energy accumulation / Display time (how long) this device is connected to a power source.