NEOECO NCT-SJ83RS1 Dual Action Airbrush 9cc 1/3 oz Fluid Cups Quick Remove Air Cap Nozzle Gravity Feed with Accessories

NEOECO NCT-SJ83RS1 Dual Action Airbrush 9cc 1/3 oz Fluid Cups Quick Remove Air Cap Nozzle Gravity Feed with Accessories

This mini compressor uses the special non-oil type design. It's non-oil makes the transmission medium not be polluted. This professional airbrush is widely used in model making, cake decorating, tattoos, nail art, etc. You can have a try.

If you need the replacement nozzle and needles, here is the link:

https://www.aliexpress.com/item/1005004878926168.htmlhttps://www.aliexpress.com/item/1005004878926168.html

Features:

Quick remove cap design, easy to use especially for fine detail working.

Compression Fit Nozzle design, more easier to clean it or replace the nozzle and needles.

Fine quality nozzle, broad spray, action trigger for easy and accurate spray.

Action gravity feed airbrush for fine art, nail art, temporary tattoo, cake decorating, hobbies etc.

Color Media: Watercolor Pigments, Inks and Dyes, Acrylic, Automotive Urethanes, Lacquers, Enamels (not Included).

Made of fine quality material, convenient to use.

Easy fluid refills and easy cleaning.

Professional action gravity feed airbrush kit for hobby paint craft.

Airbrush for model making, cake decorations, draw the outline of camouflage,tattoos nail art, etc.

Saving much more time than handmade drawing and excellent for your spray painting business.

Action trigger design saves raw materials and practical.

Widely used by the general model enthusiasts.

There are two kinds of connect ways, suitable for many kinds of compressor and spray machine, equipped with one small wrench, one paint cup, one straw, and one air inlet interface, the straw can inhale paint or other liquids.

Specifications:

Switching Mode: Dual-Action  

Nozzle Dia:Airbrush on 0.2, parts 0.3 and 0.5.

Standard Nozzle Dia.: 0.3mm.

Cup Capacity: 9cc.

Working Pressure:15-50psi.

Kindly Note:

Please receive airbrush after debugging to the best state, and then use a clean water test, atomization is normal, you can use.

Please use the stability, if dropped on the ground, may affect the use effect, or damage.

After use, please clean the airbrush, avoid clogging, effect the next time you normally use.

In order to protect the item well, a professional person to change needle and nozzle will be recommend.

To prolong your airbrush gun's life span, please clean your gun in a proper way:It will be better to clean with water thinner like Alcohol after water paint. oil paint should be cleaned with oil thinner like ethyl acetate.

Problems & Solutions:

1. Problems:Paint nozzle leak or abnormal condition of spray.

Possible reason: The needle is bent or distorted.

Solutions: change accessories/parts.

Possible reason: Poor connection of nozzle and needle.

Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net, then use the needle touch the nozzle back and forth; screw tightly the needle chucking net.

2. Problems:Could not spray or bad atomization.

Possible reason: nozzle clogged.

Solutions: clean the nozzle by solvent.

Possible reason: the needle chucking net is loose.

Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle and put it back,repeat this action a few times ;screw tightly the needle chucking net.

Possible reason: operation button doesn't work.

Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle and put it back,repeat this action a few times ;screw tightly the needle chucking net.

Applications:

Commercial arts,illustrations,photo retouching,hobby and crafts.

How To Spray:

1.Fill fluid in the cup after thinning appropriately.

2.Hold the airbrush lightly in you hand.

3.By pressing the main lever,a stream of air emerges.Then draw it backward gradually for Color atomization.

4.The spray pattern is in accordance with the distance between a work surface and a air brush.

5.For fine line spray,remove the needle cover and hold the air brush near a work surface.

Maintenance:

1.Empty the fluid cup and wash with water or solvent by a brush.

2.Refill cup with water or solvent,then block the needle cover with a finger and spray.The air flows backward into nozzle to clean the paints remained the air brush.