DC 12V Digital Temperature Voltmeter Meter IPX6 Waterproof for Boat Motorcycle 0.28 inch LED Display Volt Voltage Meter Battery

IPX6 Car Motorcycle Digital Voltmeter Thermometer DC 8-18V 12V Battery Tester Waterproof Voltage Meter Temperaure Sensor Meter

Introduction:

1. The meter head adopts a fully enclosed shell design, so it can work normally without being damaged after being immersed in water for a short time.

2. This meter can display temperature and voltage values at the same time.

3. This meter is small in size and uses three 0.28 inches LED digital tube display.

4. Two-wire wiring, simple wiring; direct measurement without external auxiliary power supply.

This meter can be used to detect battery voltage in motorcycles, automobiles, etc., and grasp the battery status in time.

Specifications:

Model: Digital Voltmeter Ammeter

Dimension: 56x31x13.5mm

Accuracy:1V;1C

Temperature Range: -10C~150C

Voltage Range: 8-18V

Length: 100cm

Power Supply: DC 2 Wires

Display: 3-digit 0.28" Dual LED Display

Waterproof: IPX6

Case Material: ABS

Wiring:

Connect red to positive and black to negative.

Notice:

1. The power supply voltage used by this meter should not be higher than 18V. Please pay attention to leave enough margin for the meter when using it to avoid permanent damage to the meter head due to motor sparks, power ripple or other excessively high sudden voltages.

2. Because this meter adopts LED display, it needs a certain working current, so it cannot be used for high internal resistance voltage measurement, such as weak signal voltage, button battery.

3. Pay attention to the wiring method. The red wire is connected to the positive and the black wire is connected to the negative.