Blind Hole Collet Bearing Puller 6-37mm, Inner Bearing Extractor Head for Automotive Motorcycle Wheel Bearing Race Seal Removal

Puller material: 40 chrome hardened

Thread size: 1/2"-12 BSW

SPECIFICATIONS

#10: 6-7mm, suitable for bearing inner diameter 6 or 7mm (The head of the 10# bearing puller is extremely thin. It is only suitable for loosely fitted ball bearings, such as those used in toy models. Additionally, there must be a gap of at least 2mm beneath the bearing for it to work. Please do not use a wrench to turn it.)

#1: 8-9mm, suitable for bearing inner diameter 8 or 9mm

#2: 10-11mm, suitable for bearing inner diameter 10 or 11mm

#3: 12-13mm, suitable for bearing inner diameter 12 or 13 or 14mm

#4: 15-16mm, suitable for bearing inner diameter 15 or  16mm

#5: 17-19mm, suitable for bearing inner diameter 17 or  18 or 19mm

#6: 20-22mm, suitable for bearing inner diameter 20-22mm

#7: 25-27mm, suitable for bearing inner diameter 25-27mm

#8: 30-32mm, suitable for bearing inner diameter 30 or 31 or 32 mm

#9: 35-37mm, suitable for bearing inner diameter 35 or 36 or 37 mm

Outer Race Puller (for loose and broken bearing)

#18: 24-33mm, suitable for loose bearing inner diameter 24-33mm

#19: 34-43mm, suitable for loose bearing inner diameter 34-43mm

#20: 43-52mm, suitable for loose bearing inner diameter 43-52mm

#21: 53-62mm, suitable for loose bearing inner diameter 53-62mm

WARM TIPS

1. The head of the 10# bearing puller is extremely thin. It is only suitable for loosely fitted ball bearings, such as those used in toy models. Additionally, there must be a gap of at least 2mm beneath the bearing for it to work. Please do not use a wrench to turn it.

2. The head of the jig can be expanded, suitable for a variety of specifications of the outer ring of the bearing.

3. It can only be used for dismantling the outer ring of deep groove ball bearings. Not suitable for needle roller bearings.

4. Applicable bearing models are not limited to those listed in the table, but the inner diameter of the outer ring is within the applicable range.

5. This puller is suitable for surface-mounted bearings. If your bearing is located in a deep hole or a confined space, please consult our customer service first. Important: Do not purchase if there is no gap at the bottom of the bearing to hook onto. Forcibly expanding the clamp when the gap is less than 1mm will lead to tool deformation and wear.

6. First purchase is recommended with a universal pull hammer

APPLICATION SCENARIO

Machinery and equipment repair, auto repair motorcycle repair, home appliance repair