Portable Magnetic Phone Cooler With Semiconductor Freeze And RGB Light Mobile-phone Radiator For iPhone MagSafe Series Android

Product Name：Mobile Phone Radiator
Charging interface：Type-C USB
Working Voltage：5V
Working Curent：3A

Electric Competition Mobile Phone Radiator LED colorful lights

LED 3 color lights，Magnetic + Back Clip 2 in 1

Multiple Styles to Choose From

We offer several color and finish options so you can pick the one that matches your personal preference or existing accessories. All models share the same cooling performance—only the exterior design changes.

Universal Compatibility – Magnetic & Clip-On Dual Mode

Works with virtually every smartphone:

· Magnetic mode – snaps directly onto iPhone 12 and newer models (MagSafe compatible).
· Clip-on mode – securely fits Android and other non‑magnetic phones with thickness between 66–85 mm.

No matter what you use, we’ve got you covered.

Inside the Beast – Powerful Hardware

Built‑in TEC (thermoelectric) semiconductor chip provides efficient, sustained cooling – actively drawing heat away from the battery and processor to maintain stable performance during long gaming sessions, live streaming, or outdoor recording in bright sunlight.

Cutting-Edge Cooling Performance

· Top‑bottom ventilation design for maximum airflow.
· Ultra‑quiet operation at just 25 dB – barely a whisper.
· Dynamic gradient backlighting adds a futuristic glow.
· Aggressive heat dissipation protects your battery and CPU, keeping performance stable even during intense gaming.

Real Results You Can See

Before‑and‑after tests show a dramatic temperature drop, so your phone stays smooth and responsive. Perfect for:

· Marathon gaming sessions
· Long live streams
· Binge‑watching series
· Outdoor shooting under the sun

Wherever you need extra cooling, it delivers.

Simple as 1‑2

1. Magnetic – just snap it on the back of your iPhone 12+.
2. Clip‑on – gently clamp it onto your Android device.

That’s it – no complicated setup, just instant cooling.

FAQ

Q1: How do I turn the cooler on/off and adjust the fan speeds?
A: Plug in the power cord and it’s ready to use.



Q2: Why doesn't the cooler seem to cool my phone effectively?
A: Please check the following two points:

1. Remove your phone case before using the cooler – cases (especially thick ones) significantly block heat transfer and reduce cooling performance.
2. Make sure your power source meets the requirements:
· The charger must output 5V / 3A or higher.
· The USB cable must support at least 3A of current.
If either is below these specs, the cooler won’t reach its full cooling capacity.



Q3: Why can't my phone magnetically attach to the cooler?
A: Please check these three possible causes:

1. If you're using an iPhone – make sure your model is iPhone 12 or newer. Only these have built‑in MagSafe magnets that work directly with the cooler’s magnetic mode.
2. If you're using an Android (or other non‑Apple) phone – the cooler’s magnetic mode is not natively supported. However, if you intend to use the clip‑on mode, please confirm your phone's width is between 66–85 mm for a proper fit. (For magnetic attachment without a built‑in magnet, see point 3 below.)
3. Use the included magnetic adhesive ring – stick it directly onto the bare back of your phone (without a case), and then the cooler will snap firmly onto that ring. This works for any phone model.

---

If you've gone through all the steps above and still have issues, feel free to contact our support team – we're here to help!