Steering Column Lock Start Modules For VW Volkswagen Passat B6 3C CC ELV J764 Ignition Mirco Switch&Relay PCB ECU Repair ACP131

When you need repair this module : - the key authorization module go nuts and it just lock you out and it not start anymore -Key couldn't open ignition,couldn't release the gear or turn the steering wheel,the display is black and car locked out/can't start - Battery In good condition all the lights on the ignition coming up but engine not cranking -Takes several attempts before car will start -Steering Column Lock defective message -Noise on the steering lock when key inserted Why cause this PROBLEM? The Access Start Authorization lock module is a part of vehicle's steering column. Module failure is a common problem in VW Volkswagen Passat B6 2006-2015 3C CC 2009-2017 model vehicles. The problem is typically identified by no start and no response from key in the ignition, or proximity access (Start button). The Start / Stop Authorization Module (along with the Electronic Ignition Switch) is responsible for key/transponder recognition, unlocking/locking of steering wheel and powering up all modules in the vehicle. If there is an issue with any of the lock module components (actuator motor, sensing micro switches, relay) or the integrated Immobilizer system Microprocessor/PCB, the module will not provide power to Terminal 15 (ignition on). End result, no ignition and no engine start. The module will typically store "00288 - Steering Column Lock Actuator Defective" fault. THE SOLUTION You don't need cost a couple of thousand dollars for this problem. You just need replace four parts. VW need two switch(1 of them with spring plate)and two ACP131 Relay. ] package: 1pc