ZTTO TL-FC41 M8100 M9100 M7100 M6100 Crank Chainring Direct Mount Tool Crankset Lock Ring Wrench for TL-FC36 TL-FC33 TL-FC32

ZTTO M7100/8100/9100 Direct Mount Chainwheel Install/ Remove Tool

Same as TL-FC41

Net weight: About 40g

Material: Aluminum alloy

The tool applies to all locking rings :

M9100/8100/7100/6100 or MT series.

Inluded:ZTTO PP-01 Tool only (without lock ring)

Notice: the lock ring should come with the crank.

Make sure you have the correct locking ring before installing

The lock ring included with the M9100 series can be used with all series.

The lock ring of the 8100/7100/6100/MT series cannot be used with the XTR series.

Refer to the lock ring compatibility table below when replacing the chainring.

Set the chainring on the crank arm

Set it so that the wide indentation on the inset portion of the chainring is aligned with

the wide convex section of the crank arm.

*When using FC-MT900, install a spacer between the crank arm and chainring.

*When using the model below, this spacer is attached to the chainring.

FC-M8100/FC-M8120/FC-M8130/FC-M7100/FC-M7120/FC-M7130/FCM6100/FC-M6120/FC-M6130/FC-MT611