Kafuter K-5204K 80g Heatsink CPU Thermal Conductive Silicon Paste Glue Adhesive Silicon Rubber insulation glue

Characteristics:
Galvanometer Good cold and heat resistance After long-term use, it is not allowed to peel or disassemble.
The alternation of cold and high intensity. It has strong adhesion, isolation and dissipation.
You can use it to get a more reliable charging heat, a simpler process and a more economical cost.
It is mainly used in the range of electronic filling, connection and sealing, the difference between CPU and radiator, the filling of high-power electronic components and radiator, etc.
Only other demo accessories on the thermal conductive silicone image are not included
Specification:
Material: Silicone rubber
Dimensions: 13.2x3.9 cm / 5.2x1.54 in
Color: White
Quantity: 1 pcs
Note: 1. Due to manual measurement, there may be an error of 0-1cm. Please make sure you don't mind before you make a price.
2 Because of the difference between different monitors, the image may not reflect the actual color of the article. Thank you!
The package includes:
1 × k-5204k hot silicon conductor
How to use:
Preparation: remove oxides, ashes, oil, etc., and clean unbonded or uncoated surfaces
Application: drill through the top of the cover. Fix the nozzle, cover the clean surface evenly with adhesive, and then merge the two surfaces.
Healing situation: the progress of healing is from the external to the internal surface. If the combined parts are too deep (especially not easy to contact with air) or the temperature is too low, decompress the elastic meter with a depth of 2-4mm within 24 hours (the ambient temperature is 55% humidity), and the whole healing time will be extended.
It is recommended that the user prepare enough time for the elastomer to obtain a complete antidote to maintain the stability of the properties.
Tip: after applying, firmly pack gum into a dry and fresh place next time. When you put it on again, you may have a little cured gel. Just take out the cured gel and use the untreated one