Gear Indicator For Kawasaki ER6F ER-6F ER6N ER-6N Ninja 250R ZX6R ZX-6R Vulcan 900 VN900 Motorcycle Accessories Gear Display

(If you encounter any problems, please be sure to contact our customer service first. Please do not leave a bad review first. Due to the time difference, etc., the customer service will reply as soon as possible after seeing the message. We very much hope to answer your questions, thank you.)

▲Fitment:

For Kawasaki ZX-6R (2003 - 2008)

For Kawasaki ZX-6RR (2003 - 2006)

For Kawasaki Z750 (2004 - 2006)

For Kawasaki Z1000 (2003 - 2006)

For Kawasaki ER-6N (2006 - 2011)

For Kawasaki ER-4N(2010 - 2014)

For Kawasaki ER-4F(2010 - 2012)

For Kawasaki ER-6F (2006 - 2011)

For Kawasaki Ninja 250R [FI only, not in USA] (2008 - 2012)

For Kawasaki Ninja 400R 2010 - 2012

For Kawasaki Ninja 650R (2006 - 2011)

For Kawasaki KLE650 (2006 - 2009)

For Kawasaki Versys650 (2006 - 2009)

For Kawasaki ZRX1200 DAEG(2009 - 2010)

For Kawasaki Vulcan 900 (2006 - 2010)

For Kawasaki VN900 (2006 - 2010)

For Kawasaki Vulcan 1700 (2009 - 2010)

For Kawasaki VN1700 (2009 - 2010)

For Kawasaki KFX450R [ATV] (2008 - 2010)

For Kawasaki Vulcan 2000 (2004 - 2010)

For Kawasaki VN2000 (2004 - 2010)

For Kawasaki KVF 750 [ATV] (2008 - 2010)

(If you encounter any questions, please be sure to contact me first, please do not leave negative comments first, I very much hope to answer your questions, thank you)

▲Description:

Condition:100% Brand New

Item Name:Speed Gear Display Indicator

Size:4cm*4cm*4cm/1.57inch*1.57inch*1.57inch

▲Feature:

Shows current gear number

Indicates current gear from 1 to max of 6. as well as a neutral indicator.

Detects the current gear faster than other gear indicators that use speedometer/tachometer signal.

Display can be mounted anywhere

▲Installation:

Find the 4-pole male diagnostic connector(DLC), usually near the ECU box,It may have a removable cap and may be partially covered by black tape.

Note: Some motorcycle models,You may find TWO of this connector on your bike,The color is generally black.In this case, try both connectors, but only one of them will supply data to this gear indicator. It will not harm your bike if you connect the gear indicator to the wrong plug first.

▲Foreword:

Congratulations on your purchase of this gear position indicator,Unlike other gear indicators available for your bike,this product connects to the diagnostic connector.It make the installation very sample. The unit reads data directly from the ECU, offering faster and more reliable readings than competing products.The display is auto learning,there are no button and no "programming wire" Know limitations;Your bike is not equipped with Gear Position Sensor. therefore determining the gear in use is only possible when the engine is running and the clutch is released.

▲Troubleshooting:

You may find TWO black connectors on the bike with a removable cap or dummy plug.Try the second one if the unit does not work from the first one.Disconnect the Gear Indicator connector and check whether the pins are broken,bent or pushed out of position.Reconnect the plug,and make sure that all connections are good and the connector is fully seated.If you can not execute the setup procedure,your battery might be old or weak.Charge the battery or connect another battery using a jumper cable.If some gears are not indicated properly when the engine is running and clutch is released,rest the unit and setup again.If the problem persists.your clutch might be slipping.

(No reset is generally required. If you need to reset, please consult our customer service. The customer service will reply you as soon as possible after seeing the information.)

▲Package List:

1 x Motorcycle Speed Gear Display/Bracket(As shown in the option picture)