RadioMaster RP4TD ExpressLRS 2.4GHz Diversity Receiver with Dual Antenna for FPV Drone Fixed Wing, RC Model DIY Parts

Note:Available with standard ISM or EU LBT FW. EU LBT FW required for use with Radios and Modules with EU LBT FW Installed. FCC is Standard version LBT is EU LBT Version Featuring dual-channel 2.4GHz radios, the RP4TD excels in signal sensitivity, signal-to-noise ratio, and overall performance due to its optimized circuit design. The reliable DCDC power supply circuit ensures lower operating temperatures during extended usage. Additionally, the dual TCXO contributes to the utmost frequency stability and makes the RP4TD a leader in its class. RP4TD features built in WIFI so you can wirelessly upgrade firmware configure the Receiver via the built-in WebUI with your PC or mobile phone. Suitable for drones and fixed-wing models, the receiver can be installed virtually any application that requires a serial receiver. Dual TCXO (temperature compensated crystal oscillator) The TCXO ensures high stability and accuracy in frequency control, compensating for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. Two TCXO offer better advantages in true diversity receivers. Features Gemini mode compatible Reliable DCDC Power supply circuit Class leading SNR and RSSI performance Optimized PCB design for better heat dissipation Upgraded antenna with greater durability and performance UART pads for extended applications Dual TCXO (temperature compensated crystal oscillator) Specifications Item: RP4TD ExpressLRS 2.4GHz Diversity Receiver Type: ISM MCU: ESP32 RF Chip: SX1281 x 2 Antenna: 65mm 2.4GHz T Antenna x 2 Frequency Range: 2.4GHz Maximum receive refresh rate: 500Hz / F1000Hz Working voltage: 5V Weight: 1.4g(without antenna) Dimension: 23.7*16.3*4.0mm Firmware Version: ExpressLRS V3.3.0 pre-installed FW Target: RadioMaster RP4TD 2400 RX Bus interface: CRSF Extend interface : UART Package Includes 1 * RP4TD ExpressLRS 2.4GHz Diversity Receiver 1 * CRSF wire 3 * Heat-Shrinkable Tube 2 * 65mm 2.4GHz T Antenna (Installed on receiver) 1 * User Manual