Nema23 57mm Stepper Motor Linear Guide Rail Table Kit Sliding Table Single Rail Ball Screw Motion Stage Single Axis Robot

● Only Slide Table:
1* 1*Single rail sliding table
1* 8mm to 8mm Coupling for Nema 23 Motor

● 1.2/2/3Nm Motor kit:
1* Single rail sliding table
1* Nema 23 57mm Open-loop Stepper Motor
1* TB6600 Drive
1* 8mm to 8mm Coupling

● 1.5/2.2/3Nm Encoder motor:
1*Single rail sliding table
1*Nema 23 57mm Closed Loop Stepper Motor
1*HB808C Drive
1* 8mm to 8mm Coupling
●1.5/2/3.2Nm All in one kit:
1* Single rail sliding table
1* Nema 23 57mm Closed Loop Stepper Motor Drive All-in-one
1* 8mm to 8mm coupling

●Sliding Table Technical Parameter:
Model: DXG6042
Ballscrew type: SFU1605
Ballscrew accuracy: C7 level
Effective stroke: 100mm-1200mm Optional
Total length: Effective Stroke+120mm
Motor bracket Matching type: Compatible with Nema 17 42mm / Nema 23 57mm Stepper motor
Mobile panel size: 60*42mm
Guide diameter: 12mm
Guide Type: MGW12R
Slider Type: MGW12C
Horizontal load: 60KG (Max)
Vertical load: 30KG(Max)
Maximum speed: 500mm/s
Ballscrew Repeat positioning accuracy: 0.02-0.03mm
Material: Industrial Aluminum Profile

●Drive Technical Parameter:
Model: TB6600
Manual: https://drive.google.com/open?id=1NHNwZy4P7mjvHdQcrkXWJ-gS2cBF_tMk
Input voltage: DC 9-42V
Input/ Output current: 0.5-3.5A
Maximum power: 150W
Subdivision: 1,2,4,8,16,32
Operating environment temperature: -10～45℃
Storage temperature: -40℃～70℃

●Model: HB808C:
Type: DSP Closed loop stepper drive
Maximum peak current: 13A
Impulse response frequency: 200KHz
Micro-stepping driver: 200~25600ppr
Input Voltage: 24-80VDC
Protective function: Over voltage, over current, tracking error, over proof
Signal input: Support PUL/DIR and CW/CCW modes (difference)
Compatible: 4.5~28V signal (Don't need a resistor)