Bicycle Puncture Protection Insert Bicycle Tires To Prevent Injury Inner Tube Pad Bike Tire Protector for Calibre 29in 700C

1.Improved Durability: Experience a puncture-free ride on any terrain with our mountain bike tire liners. Crafted from lightweight and durable EVA material, these liners offer exception performance, while replacing the need for air in your tires.
2.Enhanced Performance: Safeguard your bike's wheels with our tire liners that absorb impact, keeping the wheels smoother, and enhancing comfort while driving on rough and challenging terrains.
3.Effective Puncture Prevention: Our mountain bike tire liners provide uninterrupted rides on rough terrains. These durable liners are made with high-quality materials that prevent deflation in case of punctures, ensuring proper cycling and keeping your bike in the right position.
4.Flexible Fit: Boost the performance of your MTB or mountain bike with our tire liners, compatible with any tubeless valve wheel and tire widths of 1.9"-2.25" approx. 4.9-5.7cm and 29" 700C diameter. Perfect for any adventure.
5.Enhanced Control: Upgrade your mountain biking game with our tire liners. Achieve improved turning, climbing, downhill, and braking performance stability. Enhance control over the tread for effective riding experience, soft and grippy liners improve stability on all terrain.
Protect your MTB bike tires during cycling with our Lightweight and Durable Tire Protector. Designed to fit inside tires with a diameter of ≤ 29" (700C), this product provides improved puncture protection.
Specification
Name: Mountain Bike Tire Liners
Material: EVA
Product Weight: about 210*3.5*3.2cm/82.67*1.37*1.25inches
Product Size: about 208/Set
Usage:
1. Stretch and adjust both ends of the inner lining of the tubeless tire to the size of the rim.
2. Use cutting tools or blades for cutting.
3. Drill a hole of at least 2cm at both ends of the inner lining of the tubeless tire (using a drill bit or screwdriver)
4. Insert the zip ties and tighten them, then cut off any excess zip ties.
5. Wet the surface of the vacuum tire liner with water spray.
6. Install the side of the tire into the wheel hub, and then insert the inner lining of the tubeless tire into the tire.
7. Starting from the other side of the valve, use a tire pry bar to install the other side of the tire into the hub and end at the valve.
8. Remove the valve core.
9. Inflate the tire to block the rim.
10. Fully deflate the tire.
11. Inject sealant (50-120cc, depending on tire size) through the valve. Sealants do not contain ammonia.
12. Reinstall the valve core and inflate it to the specified pressure.
13. Before assembly, rotate the wheels and bounce them several times. Alternatively, after assembly, drive at medium speed for a few minutes to allow the sealant to completely cover the inside of the tire.


Packing List
1* Mountain Bike Tire Liner
1* Tie straps
1* Instructions
1* Backpack


Notes
1. Due to the different monitor and light effects, the actual color of the item might be slightly different from the color which is showed in the pictures.
2. Please forgive a slight measuring deviation due to manual measurement.