12x3w LED Co2 Jet Machine Stage Effect CO2 Machine DMX Control for Party DJ Disco CO2 Column Jet Machine Cannon

Product Name: 12x3w led co2 jet machine

Product Specification

Power supply: AC110V/220V, 50/60Hz
Power: 250W
Display color: R/G/B 3in1 color mixing
Light resource: LED High brightness
Quantity (LED unit): 12*3W led lamps
Material: co2 gas tank
CO2 gas height: 8-10 Meter
Control Mode: DMX Control
Channel: DMX 6 channels
Pressure Rating: Up to 1400 psi
Packing way: carton box with foam inside
Packing size: 32*32*43cm
Light weight: 5kg
Packing weight: 9kg
Feature: support co2 machine series connection DMX in/out function

6 DMX channels:

DMX has 6 channels, see as following:

Channel 1: CO2 spray (0-255) ON.
Channel 2: LED color mixing, (0-255) LED color is mixing.
Channel 3: LED in blue, (0-255) LED lights up gradually.
Channel 4: LED in green, (0-255) LED lights up gradually.
Channel 5: LED in red, (0-255) LED lights up gradually.
Channel 6: LED strobe, (0-255) getting faster.

Our advantages:

1.Spray height up to 8-10m.
2.Red, yellow, blue, green, cyan, orange, purple color available.
3.Dmx512 control ,support co2 dmx series machine connection function input/output.
4.High-quality material, good effect, and long service life.
5.Applicable for Dj, bands, bars, pubs, clubs, skating rinks, KTV, family party, birthday, celebration, wedding, festival.

Packing list for each unit:

led co2 jet machine
6m Resin Hose
2m DMX cable
power cable
manual book

How to Use :

1. Electric control: The operation of the machine is very simple to Connect the Co2 cannon to the electric control button, Then connect the machine to the Co2 gas tank via a high-pressure hose Switch the machine to the "ON" position, open the valve of the cylinder. Press the control button, the machine will spray.
2. DMX512 control: Connect Co2 jet cannon to the power supply via power cable, DMX to DMX controller via DMX cable Then connect the machine to Co2 gas tank via a high-pressure hose, Switch the bottom to"DMX position, the machine has only one channel. After setting Dmx address, operate your console, The machine will spray.
3. In order to ensure that the machine parts have a normal service life. it is recommended to control the continuous spraying time at about 10 seconds each time When the machine is not needed, and if the high-pressure pipe needs to be removed. it needs to be sure to turn off the gas cylinder switch first, and then evacuate the residual gas in the machine before removing the tube, otherwise, either end of the tube and the gas cylinder cannot be pulled out.