Car Immobilizer System Auto Anti-Theft Electronic Engine Lock With Anti-hijacking Vehicle Sensing Security System Car Accessory

Car Immobilizer System Auto Anti-Theft Electronic Engine Lock With Anti-hijacking Vehicle Sensing Security System Car Accessory





Bullet Points:
1、【Micro-Electric Design】The main unit of the Car immobilizer system is even smaller, the remote control is lighter, and the new micro-electric technology brings you more safety.
2、【Auto-Sensing Function】The remote control of the Car security system alarm has an automatic sensing function, which can be used without any operation, preventing thieves from stealing the car and providing a safety guarantee for your car.
3、【Remote Control Two Modes】Wireless immobilizer for a car has two remote control modes. Manual mode is to press the remote control every time or immediately after powering on. In automatic mode, just bring the remote control.
4、【Led Indication Function】 Car Alarm immobilizer When receiving a signal from the remote control, it flashes once for 1 second, and when no signal is received, it flashes 2 times per second for 11-20 seconds.
5、【Tools-Free Installation】Car immobilizer anti-theft installation is very simple and can be DIYed completely. Just unplug the oil fuse in the engine compartment of the car, and plug in our main unit directly to replace it to complete the installation.
Features：
The main unit of the Car immobilizer system is even smaller, the remote control is lighter,
The new micro-electric technology brings you more safety.
The remote control of the Car security system alarm has an automatic sensing function,
Specification
Unit working voltage: 12V±3V
Unit quiescent current: ≤12mA
Unit control current: ≤30A
Remote control operating current: ≤3~8mA
Remote control standby current: ≤1uA
Remote control battery specification:
How to use the remote control:
Please keep the remote control alone, do not mix it with the car keys to increase the difficulty of grabbing.
Coding learning: Press the host computer learning code switch to let go, and immediately press the remote control button, the relay in the host will beep 3 times to indicate that the code learning is successful, and the method for learning the second remote control is the same as above. Up to 2 remotes can be learned. The code has been learned well when leaving the factory, and there is no need to repeat the operation.
How to install:
First, open the fuse box, find the oil pump fuse and pull it , then replace it with the red wire plug, Keep the original fuse in a safe place, fix the main unit with a tie and cover the fuse box.
NOTICE:
When not using the system, turn the remote off for extended battery life, This product is not a waterproof design.
Product List
1 x Unit with wire (fuse=15A)
2 x Sensor Remomte
1 x User manual in English