15/20W Thick Copper Mouth Natural Gas Booster Pump Methane Pressurizer Pressure Adjustable Water Heater Gas Booster Pump

Product parameter

Product model: JXL-20

Nozzle diameter: 10mm

Power supply voltage: 220V/50H

Maximum pressure: 25Kpa

Rated power: 20W

Maximum flow: 40L/min

Product weight: 1.45KG

Product volume: 18*11*8 (length, width and height)

installation tips

1. This product is a non-automatic model. When the switch is turned on, the air pump works, and when the switch is turned off, the air pump stops working. (Reminder: When you don't need to pressurize, you must turn off the switch in time, and the air pump will be in idling state for a long time, which will cause greater loss to the motor)

2. When the air pump is not connected, the sound is loud, but after connecting the pipe, and putting a towel or soft cushion under the machine, the sound will be much reduced and it has a shock absorption effect.

3. The location of the pump installation is more than 1 meter away from the fire source. The two ends of the pump must be connected to a flexible gas pipe. More than 2 hours.

4. Keep the pump body clean. Do not allow foreign objects to enter the pump body. Keep good ventilation and keep away from heat sources during use. Do not cover the pump with any objects. If the air pressure is too low, please check whether the pump is blocked.

5. If you need to detect leaks, you can use soapy water or detergent mixed with water to smear both sides of the fuselage to check. The product will not ignite spontaneously if it is not close to an open flame. Remember not to use an open flame test.