4Pcs Climbing Rings For Maytronics For Dolphin 6101611-R4, M200 M400 M500 Swimming Pool Robot Wheel Cover Replace Climbing Ring

4Pcs Climbing Rings For Maytronics Dolphin 6101611-R4, M200/M400/M500 Underwater Robot Swimming Pool Replace Wheel Cover Ring

Features:
* Perfectly Fit: Our climbing ring replacement kit is compatible for Dolphin Robotic Pool Cleaners including M200, M400, M500, for Nautilus, for Nautilus CC Plus, DX3, DX4, DX6, for Aquarius XL, for Premier, and for Oasis Z5i.
* Great Value: The package comes with all four climbing rings 6101611-R4, also fit for Triton (old), for Deluxe 4/5, for Apollo Plus, for Wave 65, for Endeavor, for Edge, HD, for Saturn (old), for Atlantis, for Apollo, 3001, 2X2, Wave 2X2, and for Prowler 820/830.
* Premium Quality: Our replacements are made from PVA, ensure to last longer. They are perfect for maintaining your pool safe and functioning properly.
* Simple installation: Soak climbing ring thoroughly in water until they expanded and softened enough to install on rollers. Slide them in slowly and ensure that they are sitting in their designated space.

No-Hassle Installation Process:
Once you know the basics, it will become easier to disassemble, remove parts, and then replace the worn-out parts of your Dolphin pool cleaner. But the exact process may vary from model to model. This installation guide is based on the replacement instructions for Dolphin Nautilus combined brushes and climbing rings.

Open the sides of the pool cleaner, You will need a screwdriver to remove the 4 screws on the side panel.
Remove the tracks on each side/end of the opened pool cleaner.
Snap out the ends of the brush roller, one end after the other.
Only when both ends are snapped out that you can lift the brush roller out of the pool cleaner's frame.
Use a flathead screwdriver to pry the small cap off the end of the brush roller's center tube.
Remove the roller's center tube and then remove the gear caps.
CAUTION: Check the climbing rings' pliability. Whether you are replacing both or just the climbing rings, dried-out foam rollers are difficult to remove and may damage the brushes. Soak the brush roller in water until they become softer and more pliable.
Slide the climbing rings off the brush rollers.
Install the new climbing rings. When you receive the new rings, please soak it thoroughly in water in order to prepare the product for optimal usage. Be careful in installing the climbing rings. Slide them in slowly and ensure that they are sitting in their designated space.
Reassemble the brush roller assemblies, replace them in their designated slots, return the tracks, and screw back the side panels.

Package Contents:
4 * Climbing rings

Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.